Using the Simple Mode

Scanning using the simple mode

1
Display the ScanGear MF.
Start the ScanGear MF using one of the following methods.
Selecting [Display the Scanner Driver] in the MF Toolbox
Starting from an application
2
Select a document type in [Select Source].
If you select [Document (Color) ADF] or [Document (Grayscale) ADF], proceed to Step 4.
When selecting a document type other than [Newspaper (B&W)], the automatic color correction function is activated. For details on how to cancel the function, see "Using the Advanced Mode."
[Photo (Color)]
Select when scanning color photos.
[Magazine (Color)]
Select when scanning color magazines. (with the Descreen function)
[Newspaper (B&W)]
Select when scanning text and line drawings.
[Document (Grayscale)]
Select when scanning color photos or text in monochrome. It is appropriate for scanning high-resolution monochrome images.
[Document (Color) ADF]
Select when scanning color documents on the feeder.
[Document (Grayscale) ADF]
Select when scanning grayscale documents on the feeder.
3
Click [Preview].
The preview image is displayed.
The document loaded in the feeder cannot be previewed.
4
Select a purpose for the scanned image in [Select Purpose].
[Print (300dpi)]
[Image Display (150dpi)]
[OCR (300dpi)]
5
Select an output size of the scanned image.
The options you can select vary depending on what you selected in Step 4.
Click [] to change the layout orientation (landscape or portrait).
6
Adjust the cropping frames as needed.
7
Select [Fading Correction] as needed.
[Fading Correction] can be selected only when color documents are scanned.
[Fading Correction] cannot be specified when the preview image is not displayed.
8
Click [Scan].

Simple mode toolbar

[] (Auto Crop)
Specifies the cropping area of the image automatically. For details, see the following.
[] (Remove Cropping Frame)
Deletes the selected cropping frames.
[] (Left Rotate)
Rotates the image 90 degrees in the left.
[] (Right Rotate)
Rotates the image 90 degrees in the right.
[] (Information)
Displays the information of the scanned image.

Adding/Deleting the output size

Selecting [Add/Delete] in [Output Size] displays the [Add/Delete the Output Size] dialog box. This dialog box enables you to add and delete the custom output size.
[Output Size List]
Displays the registered output size name.
[Output Size Name]
Enter the output size name you want to register.
[Width]
Specifies the width of the output size.
[Height]
Specifies the height of the output size.
[Unit]
Selects the unit of measurement for the output size.
[Add]
Adds the specified output size to [Output Size List].
[Delete]
Deletes the selected output size from [Output Size List].
[Save]
Saves the registered settings.
0H1J-0AC