Setting the Speed and Duplex

Select the communication method and Ethernet connection type.
1
Press [] (Menu).
2
Select <Network Settings> using [] or [], and then press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [] (Log In/Out).
3
Select <Ethernet Driver Settings> using [] or [], and then press [OK].
4
Select <Auto Detect> using [] or [], and then press [OK].
5
Select the auto detect using [] or [], and then press [OK].
<Off>
Select the communication mode and Ethernet type manually. Proceed to Step 6.
<On>
Select the communication mode (Half duplex/Full duplex) and Ethernet type (100Base-TX/10Base-T) automatically. Proceed to Step 11.
6
Select <Communication Mode> using [] or [], and then press [OK].
7
Select the communication mode using [] or [], and then press [OK].
<Half Duplex>
Send and receive data in both directions, but not at the same time.
<Full Duplex>
Send and receive data in both directions simultaneously.
8
Select <Ethernet Type> using [] or [] and press [OK].
9
Select the Ethernet type using [] or [], and then press [OK].
<10 Base-T>
Establish 10Base-T connections.
<100 Base-TX>
Establish 100Base-TX connections.
10
Select <Apply> using [] or [], and then press [OK].
11
Press [] (Menu) to close the menu screen.
12
Restart the machine.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
0H1J-0EX