Changing the Default Settings
|
See "Attention (Combination of Copy Settings)" before you start configuration.
|
The default values of the copy are the function which is applied when the machine is turned ON, [
] (Reset) is pressed, or returned to the default screen after auto reset is performed. You can change the default values to suit your needs.
] (Reset) is pressed, or returned to the default screen after auto reset is performed. You can change the default values to suit your needs.You can change the following default settings based on your needs:
No. of Copies:
Density
Original Type
2-Sided
Copy Ratio
Paper
N on 1
Collate
Erase Frame
Sharpness
1
Press [
] (Menu).
] (Menu).2
Select <Copy Settings> using [
] or [
] and press [OK].
] or [] and press [OK].
3
Select <Change Defaults> using [] or [] and press [OK].
] or [] and press [OK].
4
Select the item using [] or [] and press [OK].
] or [] and press [OK].
For more information, see the following sections.
5
Select <Apply> using [] or [] after you have specified the setting and press [OK].
] or [] after you have specified the setting and press [OK].
6
Press [] (Menu) to close the menu screen.
] (Menu) to close the menu screen.