Fixing Assembly
Dirt may adhere to the fixing units inside the machine and cause black streaks to appear on printouts. To clean the fixing unit, perform the following procedure. Note that you cannot clean the fixing unit when the machine has documents waiting to be printed. To clean the fixing unit, you need paper larger than plain A4 or Letter size paper. Set the paper in the paper drawer or manual feed slot before performing the following procedure.
|
|
|
Cleaning requires toner. Make sure that there is sufficient toner remaining beforehand.
It takes approximately 90 seconds to clean the fixing assembly.
|
1.
Press 
and tap <Menu>.
and tap <Menu>.
2.
Tap <Adjustment/Maintenance>.
3.
Tap <Clean Fixing Assembly>.
4.
Load paper (A4/LTR or larger) in the manual feed slot, and tap <Start>.
After cleaning is completed and the message <Finished.> appears, press to return to the Home Screen.
to return to the Home Screen.