<Maintenance>

This section describes how to use the auto cleaning function for the main unit and feeder.

<Clean Feeder>

(Settings/Registration)

If streaks appear on originals scanned with the feeder or paper that is printed, execute <Clean Feeder>. Cleaning the Feeder

<Clean Wire>

(Settings/Registration)

If streaks appear on printouts, perform an automatic wire cleaning as necessary.


Wire cleaning cannot be performed during printing.

<Clean Drum>

(Settings/Registration)

Printed images may be light or distorted when the machine is used immediately after installation or is not used for a long period of time. If printed images are light or distorted, perform an automatic drum cleaning as necessary.


Drum cleaning cannot be performed during printing.

<Original Scanning Area Cleaning Method>

(Settings/Registration)

Start the video that shows how to clean the scanning area.

<Replace Toner Cartridge>

(Settings/Registration)

Plays the sample video explaining the method for replacing toner cartridges. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Load Staples (Staples)>

(Settings/Registration)

Plays the sample video explaining the method for loading staples. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.

<Load Staples (Saddle Staples)>

(Settings/Registration)

Plays the sample video explaining the method for loading saddle stitch staples. You can play this sample video even when replacement is not necessary, so that you may understand the process in advance.