Saddle Stitch Position Adjustment
If you are using the Saddle Stitch mode of the Booklet Finisher, and you notice that the saddle stitch position of the paper are not exactly in the middle of the booklet, you can make adjustments to the saddle stitch position to compensate for this error.
This mode can be set when the Booklet Finisher-Q1 PRO or Booklet Finisher-N1 is attached. (See "Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO/Puncher Unit-BS1" or "Staple Finisher-N1/Booklet Finisher-N1/Puncher Unit-BF1/Inner Booklet Trimmer-A1.")
|
IMPORTANT
|
|
If you want to adjust both the stitch position and the fold placement, adjust the stitch position first, and then adjust the fold placement. To adjust the stitch position, see "Saddle Stitch Fold Placement Adjustment."
If both the stitch position and the fold placement are in the centre of the paper after adjusting the stitch position, the adjustment of the fold placement is not necessary.
|
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Change Fold/Stitch Position].
3.
Select the paper size to change → adjust the saddle stitch position by pressing [
] or [
] → press [OK].
] or [] → press [OK].