Double Staple Width Adjustment

You can adjust the double staple width.
This mode can be set when the Staple Finisher-Q1 PRO, Booklet Finisher-Q1 PRO, Staple Finisher-N1, or Booklet Finisher-N1 is attached. (See "Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO/Puncher Unit-BT1/Puncher Unit-BU1" or "Staple Finisher-N1/Booklet Finisher-N1/Puncher Unit-BG1/Puncher Unit-BH1/Inner Booklet Trimmer-A1.")
1.
Press .
2.
Press [Adjustment/Maintenance] → [Adjust Action] → [Adjust Double Staple Width].
3.
Adjust the staple width.
If the Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO is attached:
If the Staple Finisher-N1/Booklet Finisher-N1 is attached:
If the Staple Finisher-Q1 PRO/Booklet Finisher-Q1 PRO is attached:
Press [-] or [+] to adjust the staple width.
If the Staple Finisher-N1/Booklet Finisher-N1 is attached:
Select either 120 mm or 145 mm for the staple width.
NOTE
If the width of the paper is less than 257 mm, the Adjust Staple Width mode is automatically set to '120 mm'.
4.
Press [OK].
07FL-079