Finished Stamp
The machine can print a stamp (approximately 3 mm in diameter) on the front side of scanned and sent originals.
For information on the optional products required to use this function, see "Optional Products Required for Each Function."
_fax_en_GB/b_fx-ir_025_01_b.jpg)
Vertical Placement
* Position at which stamp is applied
_fax_en_GB/b_fx-ir_025_01_c.jpg)
Horizontal Placement
* Position at which stamp is applied
|
IMPORTANT
|
|
Place your originals in the feeder. The finished stamp is applied to the originals that are scanned from the feeder.
|
1.
Press [Fax].
2.
Specify the destination → press [Options] → [Finished Stamp].
_fax_en_GB/b_fx-ir_043_01_b_C.jpg)
|
NOTE
|
|
If the stamp does not print correctly, see "Replacing the Stamp Cartridge (Feeder) (Optional)."
|
3.
Press [Close].