Replacing the Stamp Cartridge (Feeder) (Optional)
Originals sent via the feeder can be stamped to indicate that they have been sent. Replace the stamp cartridge when the stamp mark is faint or no longer visible.
 CAUTION |
|
When replacing the stamp cartridge, take care not to allow ink to come into contact with your hands or clothing. If ink gets onto your hands or clothing, wash it off immediately with cold water.
|
|
NOTE
|
|
The feeder is an optional product.
|
Duplex Color Image Reader Unit-E1
1.
Open the feeder.
2.
Pull the lever above the feeder, and open the document scan cover.
|
IMPORTANT
|
|
Open the document scan cover carefully, as not to scratch the platen glass.
|
3.
Open the stamp cover.
4.
Remove the old stamp cartridge.
5.
Push in the new stamp cartridge until it clicks.
|
IMPORTANT
|
|
Insert the stamp cartridge so that it is not slanted.
Insert the stamp cartridge properly, or paper jams may occur.
|
6.
Close the stamp cover.
 CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|
7.
Close the cover of the document scanning area until it clicks.
|
CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|
8.
Close the feeder.
|
CAUTION |
|
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
Be aware that the light emitted from the platen glass may be very bright when closing the feeder.
|
Color Image Reader Unit-F1
1.
Open the covers.
2.
Load the stamp cartridge.
 |
1. Remove the old stamp cartridge, using tweezers. |
2. Push in the new stamp cartridge until it clicks, using tweezers. |
|
IMPORTANT
|
|
Make sure that the stamp cartridge is not protruding from the surface.
Insert the stamp cartridge properly, or paper jams may occur.
|
3.
Close the covers.
|
CAUTION |
|
When closing the covers, be careful not to get your fingers caught, as this may result in personal injury.
|