If originals that have been fed through the feeder have streaks or appear dirty, clean the feeder's rollers.
Clean the rollers of the feeder with a cloth dampened with water, and wipe them with a soft, dry cloth.
Manual Feeder Cleaning
|
IMPORTANT
|
|
Spin the rollers while cleaning them.
If the document feed scanning area is dirty, documents may not be scanned clearly, and the size of the document may not be detected correctly.
|
Duplex Color Image Reader Unit-E1
1.
Open the feeder.
2.
Clean the original scanning area (thin glass strip).
3.
Pull the lever above the feeder, and open the document scan cover.
|
IMPORTANT
|
|
Open the document scan cover carefully, as not to scratch the platen glass.
|
4.
Open the inside cover.
5.
Clean the feed scanning area (thin glass strip).
6.
Close the inside cover.
 CAUTION |
|
When closing the inside cover, be careful not to get your fingers caught, as this may result in personal injury.
|
7.
Close the document scan cover.
|
CAUTION |
|
When closing the document scan cover, be careful not to get your fingers caught, as this may result in personal injury.
|
8.
Close the feeder.
|
CAUTION |
|
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
Be aware that the light emitted from the platen glass may be very bright when closing the feeder.
|
Color Image Reader Unit-F1
1.
Clean the rollers of the feeder.
 |
1. Pull the lever, and open the feeder cover. |
2. Clean the rollers (a total of three places) inside the feeder cover. |
2.
Clean the rollers inside the inner cover.
 |
1. Open the inner cover, holding it by its tab. |
2. Clean the rollers (a total of three places) inside the inner cover. |
3.
Clean the transparent plastic area on top of the inner cover.
|
CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|
4.
Clean the feed scanning area (thin glass strip).
5.
Clean the resin roller and the surrounding area.
 |
1. Turn the resin roller while turning the feed dial. |
2. Clean the area while turning the resin roller. |
|
3. Close the feeder. |
|
CAUTION |
|
When closing the feeder, be careful not to get your fingers caught, as this may result in personal injury.
|
6.
Close the feeder cover.
|
CAUTION |
|
When closing the cover, be careful not to get your fingers caught, as this may result in personal injury.
|