Flow of Operations for Administrators
If the System Manager Settings (System Manager ID/System PIN) are set
1.
Press 
(Settings/Registration).
(Settings/Registration). _adfunc_en_UV/b_adfunc_003_01_a_L.jpg)
2.
Press [Log In].
3.
Specify the following.
Press [System Manager ID] → enter the Department ID.
Press [System PIN] → enter the PIN.
4.
Press [OK].
If the System Manager PIN is still the default setting, a screen prompting you to change the System Manager PIN appears. Change the PIN according to the instructions on the screen.
|
IMPORTANT
|
|
Make sure that you do not forget the System Manager PIN. If you forget the System Manager PIN, contact your local authorized Canon dealer.
|
5.
Display the desired setting from the list.
6.
Specify the setting → press [Close].
To move up one level, press [Up].
7.
When you finish specifying the settings, press [Log Out] at the bottom right of the screen to log out.
You can also press 
(Log In/Out) to log out.
(Log In/Out) to log out._adfunc_en_UV/b_adfunc_003_01_f_L.jpg)
If the System Manager Settings are set and Department ID Management is used
1.
Specify the following.
Press [Dept. ID] → enter a Department ID.
Press [PIN] → enter a PIN.
2.
Press [Log In].
You can also press (Log In/Out) to log in.
(Log In/Out) to log in.3.
Press (Settings/Registration).
(Settings/Registration). 4.
Display the desired setting from the list.
5.
Specify the setting → press [Close].
To move up one level, press [Up].
6.
When you finish specifying the settings, press [Log Out] at the bottom right of the screen to log out.
You can also press (Log In/Out) to log out.
(Log In/Out) to log out.If the System Manager Settings are set and SSO-H is used
1.
Specify the following.
Press [User Name] → enter a user name → press [OK].
Press [Password] → enter a password → press [OK].
2.
Press [Log In].
You can also press (Log In/Out) to log in.
(Log In/Out) to log in.3.
Press (Settings/Registration).
(Settings/Registration). 4.
Display the desired setting from the list.
5.
Specify the setting → press [Close].
To move up one level, press [Up].
6.
When you finish specifying the settings, press [Log Out] at the bottom right of the screen to log out.
You can also press (Log In/Out) to log out.
(Log In/Out) to log out.