Colour Mode Settings for Copy
This section describes how to set the colour selection for copying.
This mode can be set when the Copy function is available for use. For information on the optional products required to use the Copy function, see "Optional Products Required for Each Function."
Restricting Use of Auto-Colour Select
You can restrict the use of the colour mode (Auto-Color Select).
1.
Press 
(Settings/Registration).
(Settings/Registration).2.
Press [Function Settings] → [Copy] → [Select Color Settings for Copy].
3.
Press [Use Auto (Color/Black)].
4.
Select [Off] → [OK].
Select [On] if you do not want to restrict the use of the Auto (Color/Black) mode.
Restricting the Use of Full Colour
You can restrict the use of the colour mode (Full Color).
1.
Press (Settings/Registration).
(Settings/Registration).2.
Press [Function Settings] → [Copy] → [Select Color Settings for Copy].
3.
Press [Use Full Color].
4.
Select [Off] → [OK].
Select [On] if you do not want to restrict the use of the Full Color mode.