Changing and Cancelling Copy Settings
You can use the Setting Confirmation screen to confirm, change, or cancel selected copy modes.
1.
Press [Copy].
2.
Set the desired copy modes → press [Check Settings].
You can check the settings.
|
NOTE
|
|
A right triangle (
 ) displayed on the [Change] button when a copy mode is selected indicates that more setting screens are available by pressing the key. |
3.
Change the selected copy mode → Press [Change].
Changing the copy mode:
Change the settings → Press [OK].
Change the settings as required, using the same procedure as for setting each mode.
Cancelling the copy mode:
Press [Cancel Set.].
|
NOTE
|
|
To cancel a mode that does not have a setting screen, press [Change].
|
4.
Press [OK].