Cancelling a Copy Job

Cancelling a Job That Is Scanning

1.
Press [Cancel] on the pop-up screen that appears while the machine is scanning.
NOTE
You can also cancel scanning by pressing (Stop).

Cancelling a Job That Is Copying/Waiting to Copy

1.
Press (Stop).
If there are jobs waiting to copy, a list of the jobs appears.
Select the job that you want to cancel from the list → press [Cancel].
Press [Resume Copying] to resume the remaining jobs.
IMPORTANT
You cannot select multiple jobs and cancel them all at once. Select and cancel one job at a time.
NOTE
If you press [Cancel] on the pop-up screen that appears while the machine is copying or waiting to copy, you can cancel the job that is copying or the last job that you scanned an original for that is waiting to copy.

Using the Status Monitor/Cancel Screen

1.
Press [Status Monitor/Cancel].
2.
Press [Copy/Print] → [Job Status].
3.
Select [Copy] from the drop-down list.
Only copy jobs are displayed in the list.
4.
Select the copy job that you want to cancel → press [Cancel].
Select and cancel one job at a time.
5.
Press [Yes].

NOTE
The cancelled job appears as <NG> (No Good) on the Log screen.
0CJ7-0HL