Checking the Counter and Controller Version

You can check the copy and print page counts, and the copy and print page counts for each MEAP application.

You can also check the version of the controller.

Press [Counter Check] or

(Counter Check) on the control panel.

Control Panel (Flat)

Upright Control Panel-B1

NOTE
Each item of the counter is counted under the following conditions. Depending on the settings performed by the local authorized Canon dealer, the following counter may not be displayed or counter not listed below may be displayed.

Number	Counter Name	Counted Items	Counted Number per One Printed/Scanned Sheet*1
		Job Type	Size		Number of Printed/Scanned Sides
		Job Type	Large*2	Small*3	One-Sided	Two-Sided
101	Total 1	All Print Jobs	1	1	1	2
102	Total 2	All Print Jobs	2	1	1	2
103	Total (Large)	All Print Jobs	1	0	1	2
112	Total (Black/Large)	All Print Jobs	1	0	1	2
113	Total (Black/Small)	All Print Jobs	0	1	1	2
127	Total A 2	All Print Jobs (Except Copy Jobs)	2	1	1	2
201	Copy (Total 1) *4	Copy Jobs	1	1	1	2
202	Copy (Total 2) *4	Copy Jobs	2	1	1	2
203	Copy (Large) *4	Copy Jobs	1	0	1	2
301	Print (Total 1)	All Print Jobs (Except Copy and Receive Print Jobs)	1	1	1	2
403	Copy + Print (Black/Large) *4	All Print Jobs (Except Receive Print Jobs)	1	0	1	2
404	Copy + Print (Black/Small) *4	All Print Jobs (Except Receive Print Jobs)	0	1	1	2
501	Scan (Total 1) *4	All Scan Jobs	1	1	1	2

*1 The counted number per one printed/scanned sheet for each item on the counter is as follows:
"number in the Size (Large or Small) column" x "number in the Number of Scanned/Printed Sides (One-Sided or Two-Sided) column"
Example: For large, double-sided print, the number added to <102 Total 2> is 2 x 2 = 4.

*2 Large: Standard size larger than 11" x 17".

*3 Small: Standard size smaller than LTR.

*4 Indicates items that appear only when the Copy/Scan function is available for use. For information on the optional product required to use the Copy/Scan function, see "Optional Products Required for Each Function."

Check the following.

To check the counter report:

To check the Send/Fax counter:

To check the MEAP counter:

To check the controller version or installed options:

To check the counter report:

Press [Print List].

Press [Yes].

To check the Send/Fax counter:

Press [Check Send/Fax Counter].

[Check Send/Fax Counter] is displayed only if the fax board is installed.
If the fax board is not installed, [Check Send Counter] is displayed.

NOTE
For each item of the Send/Fax Counter, the number of scanned sides are counted under the following conditions.

:Available

-: Unavailable

Counter Name	Types of Destination Used for Counting*1					Colour Mode
Counter Name	E-Mail	File	Mail Box	Fax	I-Fax	Colour Mode
Black Scan (Total 1)						Counted when the colour mode is Black-and-White or Grayscale.
Black Scan 1				-	-
Black Scan 2			-	-	-
Black Scan 3	-		-	-	-
Black Scan 4	-			-	-
Color Scan (Total 1)				-	-	Counted when the colour mode is Full Color.
Color Scan 1				-	-
Color Scan 2			-	-	-
Color Scan 3	-		-	-	-
Color Scan 4	-			-	-

*1: If there is more than one corresponding destination, the number of scanned sheets is counted.

Press [OK].

To check the MEAP counter:

Press [Check MEAP Counter].

Press the <Application Name:> drop-down list → select the desired application.

To check the version information of an application, the MEAP Contents version information, etc., press [Version Information].

Press [OK].

To check the controller version or installed options:

Press [Check Device Configuration].

Press [OK].