Copy Card Reader-F1
If the Copy Card Reader-F1 is attached to the machine, you must insert a control card to operate it. The Copy Card Reader-F1 performs Department ID Management by using the control card.
For instructions on performing Department ID Management using the Copy Card Reader-F1, see Setting the Department ID Management Procedure before Using the Machine Procedure after Using the Machine
For instructions on performing Department ID Management using the Copy Card Reader-F1, see Setting the Department ID Management Procedure before Using the Machine Procedure after Using the Machine
Procedure before Using the Machine
1
Insert the control card into the card slot, making sure that it is facing in the correct direction.
The Main Menu screen of the selected function appears on the display.
Procedure after Using the Machine
1
After you finish using the machine, remove the control card.
The display returns to the screen for inserting the control card.
Once you have removed the control card, you cannot operate the machine until the control card is inserted again.
 |
|
If the Main Menu screen does not appear on the touch panel display when the control card is inserted, make sure that:
The control card is inserted in the correct direction.
The control card is inserted as far as it can go.
An unusable control card is not inserted.
(For example, damaged cards or cards prohibited from use.) For instructions on turning the power On, see Turn On the Power/Shutting Down the Machine
If the Copy Card Reader-F1 is attached, the cards shown here can be used. The card can manage up to 1,000 departments.
  |
|
Item
|
Specifications
|
|
Available Cards
|
Magnetic
|
|
Card Readout Method
|
Magnetic readout
|
|
Magnetic Card Reading Direction
|
Face up
|
|
Store/Replay
|
Replay
|
|
Power Source
|
From the main unit
|
|
Dimensions (H x W x D)
|
40 mm x 88 mm x 96 mm
(excluding the attachment kit and cable) |
|
Weight
|
Approximately 200 g
(including the attachment kit and cable) |