Handset-J1
The machine has a FAX/TEL switching function for switching to the telephone when a call is received, and to the fax when a fax is received. By connecting a telephone or HANDSET-J1 to the machine, you can make and receive calls the same way as an ordinary telephone. For instructions on configuring the FAX/TEL function, see Setting Up the Machine to Receive Faxes.
|
|
|
To make/receive calls, you must connect a telephone or HANDSET-J1 to the machine.
|
 |
|
Although your telephone and HANDSET-J1 can be installed at the same time, you can only use one at a time.
|
Making a Call
1
Lift the HANDSET-J1.
2
Tap <Fax>.
3
Enter the destination using the numeric keys, and tap <Apply>.
4
When the other party answers, begin the call.
5
When the call ends, replace the HANDSET-J1.
When replacing the HANDSET-J1, return the cord to the correct position.
Receiving a Call
1
When the telephone rings, lift the HANDSET-J1 and begin the call.
The design of the HANDSET-J1 may differ, but functioning and quality are the same. You can set the volume of the telephone ring to high, low, or off. Use the tip of a mechanical pencil, etc. to set the ring volume switch.
*1 Hook button
*2 Ring volume switch
2
When the call ends, replace the HANDSET-J1.
When replacing the HANDSET-J1, return the cord to the correct position.
|
|
|
If the HANDSET-J1 experiences howling, reduce the alarm volume and call volume. (Adjusting the Volume)
|