Copy Card Reader-F1

If the Copy Card Reader-F1 is attached to the machine, you must insert a control card to operate it. The Copy Card Reader-F1 performs Department ID Management by using the control card.
For instructions on performing Department ID Management using the Copy Card Reader-F1, see Setting the Department ID Management Procedure before Using the Machine Procedure after Using the Machine

Procedure before Using the Machine

1
Insert the control card into the card slot, making sure that it is facing in the correct direction.
The Main Menu screen of the selected function appears on the display.

Procedure after Using the Machine

1
After you finish using the machine, remove the control card.
The display returns to the screen for inserting the control card.
Once you have removed the control card, you cannot operate the machine until the control card is inserted again.
If the Main Menu screen does not appear on the touch panel display when the control card is inserted, make sure that:
The control card is inserted in the correct direction.
The control card is inserted as far as it can go.
An unusable control card is not inserted.
(For example, damaged cards or cards prohibited from use.)
For instructions on turning the power On, see Turn On the Power/Shutting Down the Machine
If the Copy Card Reader-F1 is attached, the cards shown here can be used. The card can manage up to 1,000 departments.
Item
Specifications
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Magnetic Card Reading Direction
Face up
Store/Replay
Replay
Power Source
From the main unit
Dimensions (H x W x D)
40 mm x 88 mm x 96 mm
(excluding the attachment kit and cable)
Weight
Approximately 200 g
(including the attachment kit and cable)
14E8-0EU