Carrying the Machine to the Installation Location and Removing the Packing Materials

Carry the machine to the installation site and remove the packing materials. For information on the installation space, see "Installation and Handling."
1
Take the machine out of the plastic bag, and then carry the machine to the installation site.
2
Remove the unpacking manual and packing materials.
(1)
Remove the unpacking manual and packing materials from the outside of the unit.
*
Do not remove the cap (A) on the USB port at this stage. Uncap when installing for USB connection.
(2)
Remove the packing materials from the platen glass.
(3)
Remove the packing materials that are under the operation panel.
Check!
To remove the packing materials
Make sure that the following packing materials are all removed from the machine.
3
Insert the paper drawer into the machine.
Continue with the steps in the procedure below and remove the packing materials from the toner cartridge.
"Preparing to Use the Toner Cartridge"