Setting the Permission for HTTP Communications

HTTP is used such as when you access the machine via the Remote UI. If you are using a USB connection or are otherwise not using HTTP, you can disable HTTP to reduce the risk of malicious third-party intrusions via the unused HTTP port.
IMPORTANT
Disabling HTTP disables some of the network capabilities, such as the Remote UI and WSD printing.
When the setup is complete
Restart the machine to take effect the settings.
1
Press [] (Menu).
2
Select <Network Settings> using [] or [] and press [OK].
When the system manager ID and system manager PIN are specified
Use the numeric keys to enter the ID and number, and then press [] (Log In/Out).
3
Select <TCP/IP Settings> using [] or [] and press [OK].
4
Select <Use HTTP> using [] or [] and press [OK].
5
Select <Off> or <On> using [] or [] and press [OK].
<Off>
Disallow HTTP communications.
<On>
Allow HTTP communications.
6
Press [] (Menu) to close the menu screen.
7
Restart the machine.
It is necessary to restart the machine to take effect the settings.
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
0F27-0HX