Security

This chapter describes how to configure various security settings and restrictions.

Set the manager information first to specify security settings. Then, specify restrictions.

Specifying system manager settings	See "Setting the System Manager Information."
Specifying the machine name and location (iR 1133iF only)	See "Registering the Name of the Machine and Location (iR 1133iF Only)."
Specifying the setting for department ID management	See "Specifying the Setting for Department ID Management."
Specifying keys and certificates	See "Specifying Keys and Certificates/CA Certificates."
Specifying SSL	See "Specifying SSL."
Using IEEE802.1X Authentication	See "Setting IEEE802.1X Authentication."
Using Secure Printing	See "Entering PIN for Printing (Secure Printing) ."
Setting restrictions on the Remote UI	See "Configuring the Remote UI."
Restricting Network Connections	See the following sections. "Restricting Sending/Receiving to/from Specific IP Addresses" "Restricting Sending/Receiving to/from Specific MAC Addresses" "Monitoring/Controlling Devices by SNMP (SNMP Setting)" "Setting the Permission for HTTP Communications" "Setting Protocol Port Numbers" "Setting the Dedicated Port" "Setting a Proxy"
Restricting to specify destinations and use the sending functions (iR 1133iF only)	See the following sections. "Setting a PIN for the Address Book" "Restricting Destinations that Can Be Specified" "Restricting to Send Faxes from Your Computer " "Restricting Sending from Job History" "Confirming the Entered Fax Number " "Confirming Destinations for One-Touch/Coded Dial TX" "Restricting Sequential Broadcasts" "Specifying Display Settings for the Job History"
Restricting USB Port or USB Memory Usage	See "Restricting USB Port or USB Memory Usage."