Configuring System Settings

This section describes how to configure the system settings.
See the following sections for more information:

System Settings Procedure

Follow the steps in the procedure below to configure the system settings.
The procedure describes the steps to change the "RX Start Speed" setting.
1
Press [] (Menu).
2
Press [] or [] to highlight <System Settings>, and then press [OK].
If a System Manager PIN is specified:
Use the numeric keys to enter the System Manager PIN, and then press [OK].
3
Press [] or [] to highlight <Communication Management Settings>, and then press [OK].
4
Press [] or [] to highlight <Fax Settings>, and then press [OK].
5
Press [] or [] to highlight <RX Start Speed>, and then press [OK].
6
Press [] or [] to highlight the receive start speed, and then press [OK].
Select <Apply> when <Apply> appears on the screen after you have specified the setting and press [OK].
7
Press [] (Menu) to close the Menu screen.

Options

Configure the following options to receive a fax:
System Settings
Communication Management Settings
Fax Settings
0AE1-08L