Checking Network Connection (Wireless LAN)

Can you connect your computer to the internet?
NO
Complete the computer and wireless LAN router or access point settings.
Connect the wireless LAN router or access point power cables, network key and so forth properly.
If the power to the wireless LAN router or access point is turned off, turn it on.
When you cannot connect to the internet even after checking:
Restart each device. Wait a short while and then check whether the computer can connect to the internet.
For the restart procedure, the network connection method and so forth, see the instruction manual provided with each device, or contact the manufacturer.
YES
Is the machine's power turned ON?
NO
Turn ON the machine.
If the machine is already ON:
Turn OFF the machine and wait for at least 10 seconds before turning it back ON.
YES
Does the installation area of the wireless LAN router or access point and machine conform to the following?
The distance between access points is within 50 m(may vary on the communication speed or environmental condition)
There are no obstacles between the access point and the machine
No microwave ovens or digital cordless phones in the vicinity
NO
Install the machine and wireless LAN router or access point in an area that meets the installation conditions on the left.
"Installation and Handling"
YES
After the above have been checked, perform the setup operation again.
"Setting the Machine Using WPS (Push Button Mode)"
"Setting the Machine Using WPS (PIN Code Mode)"
"Setting by Manually Selecting an Access Point"
"Setting by Manually Entering SSID"
0AE1-0K8