Preferences

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.
The settings marked with "*" are only for MF4890dw/MF4880dw.

Sound Volume Control

Settings
Descriptions
Fax Tone
Set the volume for the fax communication sound:
Off
On:
Fax Volume: 1 to 5
Ring Tone
Set the ringer volume:
Off
On:
Ring Tone Volume: 1 to 5
TX Done Tone
Set the volume of the transmission completion tone:
Off
On:
TX Done Volume: 1 to 5
Only When Error Occurs:
TX Done Volume: 1 to 5
RX Done Tone
Set the volume of the receipt completion tone:
Off
On:
RX Done Volume: 1 to 5
Only When Error Occurs:
RX Done Volume: 1 to 5
Scanning Done Tone
Set the volume of the scan completion tone:
Off
On
Scanning Done Volume: 1 to 5
Only When Error Occurs:
Scanning Done Volume: 1 to 5
Entry Tone
Specify whether or not the machine makes a sound when a key on the operation panel is pressed:
Off
On:
Entry Tone Volume: 1 to 5
Invalid Entry Tone
Specify whether or not the machine makes a sound when an invalid key is
pressed:
Off
On:
Invalid Entry Tone Vol: 1 to 5
Warning Tone
Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations:
Off
On:
Warning Tone Volume: 1 to 5
Job Done Tone
Specify whether the machine makes a sound when a job other than faxing is completed.
Specify the job done tone in <TX Done Tone> and <RX Done Tone>:
Off
On:
Job Done Tone Volume: 1 to 5
Energy Saver Alert
Specify whether or not the machine makes a sound when it is in Energy Saver mode:
Off
On:
Energy Saver Alert Vol: 1 to 5
Original in Feeder Detection Tone
Specify whether or not the machine makes a sound when the documents are placed in the feeder. The sound is same as the entry sound:
Off
On:
Orig. Detection Tone: 1 to 5

Display Settings

Settings
Descriptions
Select Default Screen
Set which screen will appear when the machine is turned ON or auto reset is performed:
Copy, Fax, Scan
Language
Select the display language for the machine:
English, French, Portuguese, Spanish
Remote UI Language
Select the display language for the Remote UI:
English, French, Portuguese, Spanish
Contrast
Adjust the display contrast:
-2 to 0 to +2
Invert Screen Colors
If <On> is specified, the colors of the display are inverted.
Select <On> in case you have difficulty viewing the display:
Off, On
mm/Inch Entry Switch
Set the unit of measurement for the paper size:
mm, Inch
Gram/Pound Switch
Set a unit of measure for paper weight:
Gram, Pound
Message Display Time
Set the duration during which each message is displayed on the screen:
1 to 2 to 5 (sec.)
Scrolling Speed
Set the speed to scroll through the menu when all the menu items cannot be shown on the screen:
Slow, Normal, Fast
Cursor Movement
When entering characters, specify whether or not to move the cursor to automatically to the next field:
Auto, Manual

Toner Saver Mode

Settings
Descriptions
Copy
Set the Toner Saver mode for the Copy mode:
Off, On
Fax
Set the Toner Saver mode for the Fax mode:
Off, On

Paper Feed Method Switch*

When you print on paper with a logo previously, you can perform the print to adjust the logo position correctly without replacing paper in the cassette even in 1-sided or 2-sided printing mode. You can specify the settings for each paper source:
Multi-Purpose Tray: Print Speed Priority, Print Side Priority
Drawer 1: Print Speed Priority, Print Side Priority
0AE1-0HS