Network Settings (MF4890dw/MF4870dn/MF4780w Only)

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.
The settings marked with "*" are only for MF4890dw/MF4780w.

Select Wired/Wireless LAN*

Select wireless LAN or wired LAN:
Wired LAN, Wireless LAN
"Connecting to Wireless LAN (MF4890dw/MF4780w Only)"
"Switching the Connection Method to Wireless LAN or Wired LAN (MF4890dw/MF4780w Only)"

Wireless LAN Settings*

Specify the wireless LAN settings:
"Connecting to Wireless LAN (MF4890dw/MF4780w Only)"
Settings
Descriptions
WPS Push Button Mode
Use the access point WPS button to connect wirelessly using WPS:
"Connecting to Wireless LAN (MF4890dw/MF4780w Only)"
WPS PIN Code Mode
Send a PIN code to the access point to connect wirelessly using WPS:
"Setting the Machine Using WPS (PIN Code Mode)"
SSID Settings
Enter the WEP key or PSK needed to connect with the access point:
Select Access Point, Manual Settings
"Connecting to Wireless LAN (MF4890dw/MF4780w Only)"
"Setting by Manually Entering SSID"
Wireless LAN Information
It displays information about the current wireless LAN connection:
MAC Address, Wireless LAN Status, Latest Error Information, Channel, SSID Settings, Security Settings
"Check Wireless LAN Information (MF4890dw/MF4780w Only)"

TCP/IP Settings

Specify the TCP/IP Settings:
Settings
Descriptions
IPv4 Settings
Specify IP address (IPv4):
"Setting the IPv4 Address"
IP Address Settings
Enter the IP address.
An IP address is a number to identify the communication devices (computers, printers, etc.) connected to a network which uses the TCP/IP protocol:
Auto Obtain:
Select Protocol: Off, DHCP, BOOTP, RARP
Auto IP: Off, On
Manual Obtain:
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway Address: 0.0.0.0
View Settings:
Auto Obtain
IP Address
Subnet Mask
Gateway Address
"Setting the IPv4 Address"
PING Command
Program for diagnosing TCP/IP network.
You can check whether the machine connects to the computer or not:
"Checking the Network Connection"
DNS Settings
DNS is a system which assigns a name (domain name) to a server on a network to correspond with the IP address of the server:
DNS Server Settings:
Primary DNS Server: 0.0.0.0
Secondary DNS Server: 0.0.0.0
DNS Host Name/Domain Name Settings:
Host Name
Domain Name
DNS Dynamic Update Settings: Off, On
"Setting IPv4 DNS"
mDNS Settings
Enables DNS functionality without a specific server such as DNS:
Off
On:
mDNS Name
"Setting IPv4 DNS"
IPv6 Settings
IPv6 is a communication protocol equivalent to an advanced version (Version 6) of the Internet Protocol (IP):
"Setting the IPv6 Address"
Use IPv6
Specify IP address (IPv6):
Off, On, View Settings
"Setting the IPv6 Address"
Stateless Address Settings
Specify whether to use the stateless address:
Off, On, View Settings
"Setting the IPv6 Address"
Use DHCPv6
Specify whether to use DHCPv6 (stateless address):
Off, On, View Settings
"Setting the IPv6 Address"
DNS Settings
DNS is a system which assigns a name (domain name) to a server on a network to correspond with the IP address of the server:
DNS Host Name/Domain Name Settings:
Use IPv4 Host/Domain: Off (Host Name, Domain Name), On
DNS Dynamic Update Settings:
Off
On:
Register Manual Address: Off, On
Register Stateful Address: Off, On
Register Stateless Address: Off, On
"Setting IPv6 DNS"
mDNS Settings
Enables DNS functionality without a specific server such as DNS:
Off
On:
Use IPv4 Name for mDNS: Off, On
"Setting IPv6 DNS"
LPD Settings
LPD is a print application available in Windows, Mac OS X, UNIX, and Linux.
This is generally used in a TCP/IP protocol network environment:
Off, On
"Machine Connection Method (LPD/RAW/WSD)"
RAW Settings
RAW is a print application available in Windows.
When using RAW, printing speed is faster than when using LPD:
Off, On
"Machine Connection Method (LPD/RAW/WSD)"
WSD Settings
WSD is a print application available in Windows Vista/7/8/Server 2008/Server 2012.
Use WSD protocol to search printers automatically and obtain information for jobs or printers:
WSD Print Settings:
Use WSD Print: Off, On
Use WSD Browsing: Off, On
WSD Scan Settings:
Use WSD Scan: Off, On
Use Computer Scan: Off, On
Use Multicast Discovery: Off, On
"Machine Connection Method (LPD/RAW/WSD)"
Use HTTP
Specify whether to use HTTP communication (Remote UI via Web browser):
Off, On
"Setting the Permission for HTTP Communication"
Port Number Settings
Depending on your network environment, you can change the port number for each protocol:
LPD: 0 to 515 to 65535
RAW: 0 to 9100 to 65535
HTTP: 0 to 80 to 65535
SNMP: 0 to 161 to 65535
"Setting the Print Port Number"
IP Address Range Settings
Set whether or not to validate a range of IP addresses to restrict or allow the access to the machine that specified from the Remote UI:
IPv4 Address Range Settings: Off, Only Allowed Addresses On,Only Denied Addresses On, Allowed/Denied Addresses On
IPv6 Address Range Settings: Off, Only Allowed Addresses On,Only Denied Addresses On, Allowed/Denied Addresses On
"Restricting Access from Specific IP Addresses"
Allowed RX MAC Address Settings
Set whether or not to validate the MAC addresses to allow access to the machine that specified from the Remote UI:
Off, On
"Allowing Access from Specific MAC Addresses"

SNMPv1 Settings

You can monitor and control the machine using an SNMP-enabled device:
"Setting SNMPv1"
Settings
Descriptions
SNMPv1 Settings
Set whether or not to use SNMPv1, and set the Community Name and access rights used by SNMP:
Off
On
Community Name 1: public
Community Name 2: Not Set
MIB Access Permission 1: Read/Write, Read Only
MIB Access Permission 2: Read/Write, Read Only
Dedicated Community Settings: Off, Read/Write, Read Only
Printer Management Information From Host: Off, On
"Setting SNMPv1"

Dedicated Port Settings

To scan using the network connection, you need to set the dedicated port settings <On>.
Off, On
"Setting the Dedicated Port for Scanning"

Startup Settings

Specifies the waiting time until the network connection is setup:
0 to 300 (sec.)
"Specifying the Wait Time until the Machine Connects to a Network"

Ethernet Driver Settings

Select the communication method and Ethernet connection type:
"Setting Speed and Duplex"
Settings
Descriptions
Auto Detect
Specify whether to search automatically:
Off:
Communication Mode: Half Duplex, Full Duplex
Ethernet Type: 10BASE-T, 100BASE-TX
On
"Setting Speed and Duplex"
MAC Address
It displays a particular number assigned to each communication device (computers, printer, etc.) connected to a network:
"Checking the MAC Address"

Initialize Network Settings

Reset the network settings and restore the settings back to their default settings. Follow the onscreen insructions.
"Initializing the Network Settings (MF4890dw/MF4870dn/MF4780w Only)"
0874-0EF