Canceling Fax Jobs

You can cancel a fax transmission that is in progress.
NOTE
How to cancel fax sending:
You can also cancel the job with the following procedures.
To cancel the job in the Status Monitor/Cancel screen.
Press [] (Stop) twice (when there is one job processing).
1
When <Scanning...> is displayed after the fax sending starts, press [] or [] to highlight <Cancel>, and then press [OK].
You can also cancel the job by pressing [] (Stop) twice (when there is one job processing).
When your fax is placed on the platen glass:
When <Scan Next: Press Start> is displayed, follow the same steps as the above.
2
When <Cancel?> appears on the screen, press [] or [] to highlight <Yes>, and then press [OK].
You can also cancel the job by pressing [] (Stop).
The job is canceled.
0AE3-052