Configuring System Settings
This section describes how to configure the system settings.
See the following for more information.
"Options"
The Steps to Take for Configuring the System Settings
Follow the steps in the procedure below to configure the system settings.
The procedure describes the steps to change the "TX Start Speed" setting.
1
Press [
] (Menu).
] (Menu).2
Press [
] or [
] to highlight <System Settings>, and then press [OK].
] or [] to highlight <System Settings>, and then press [OK].
If a System Manager PIN is specified:
Use the numeric keys to enter the System Manager PIN, and then press [OK].
3
Press [] or [] to highlight <Communication Management Settings>, and then press [OK].
] or [] to highlight <Communication Management Settings>, and then press [OK].
4
Press [] or [] to highlight <Fax Settings>, and then press [OK].
] or [] to highlight <Fax Settings>, and then press [OK].
5
Press [] or [] to highlight <TX Start Speed>, and then press [OK].
] or [] to highlight <TX Start Speed>, and then press [OK].
6
Press [] or [] to highlight the send start speed, and then press [OK].
] or [] to highlight the send start speed, and then press [OK].
 |
Highlight <Apply> when <Apply> appears on the screen after you have specified the setting and press [OK].
|
7
Press [] (Menu) to close the Menu screen.
] (Menu) to close the Menu screen.The procedure is complete.
Options
Configure the following options to send a fax:
|
System Settings
|
||
|
Communication Management Settings
|
Fax Settings
|
|
|
Restrict TX Function
|
|
|