Preferences

NOTE
Menu options in the following chart:
Default settings are highlighted in bold.
For values with "*" mark, the default value varies depending on the country where you are using the machine.

Sound Volume Control

Settings
Descriptions
Fax Tone
Set the volume for the fax communication sound.
Off
On:
Fax Volume: 1 to 5
"Adjusting the Volume"
Ring Tone
Set the ringer volume:
Off
On:
Ring Tone Volume: 1 to 5
"Adjusting the Volume"
TX Done Tone
Set the volume of the transmission completion tone:
Off
On:
TX Done Volume: 1 to 5
Only When Error Occurs:
TX Done Volume: 1 to 5
"Adjusting the Volume"
RX Done Tone
Set the volume of the receipt completion tone:
Off
On:
RX Done Volume: 1 to 5
Only When Error Occurs:
RX Done Volume: 1 to 5
"Adjusting the Volume"
Scanning Done Tone
Set the volume of the scan completion tone:
Off
On
Scanning Done Volume: 1 to 5
Only When Error Occurs:
Scanning Done Volume: 1 to 5
"Adjusting the Volume"
Entry Tone
Specify whether or not the machine makes a sound when a key on the operation panel is pressed:
Off
On:
Entry Tone Volume: 1 to 5
"Adjusting the Volume"
Invalid Entry Tone
Specify whether or not the machine makes a sound when an invalid key is pressed:
Off
On:
Invalid Entry Tone Vol: 1 to 5
"Adjusting the Volume"
Warning Tone
Specify whether or not the machine makes a sound when unexpected events occur, such as paper jams or improper operations:
Off
On:
Warning Tone Volume: 1 to 5
"Adjusting the Volume"
Job Done Tone
Specify whether the machine makes a sound when a job other than faxing is completed.
Specify the job done tone in <TX Done Tone> and <RX Done Tone>:
Off
On:
Job Done Tone Volume: 1 to 5
"Adjusting the Volume"
Energy Saver Alert
Specify whether or not the machine makes a sound when the machine enters the sleep mode:
Off
On:
Energy Saver Alert Vol: 1 to 5
"Adjusting the Volume"
Original in Feeder Detection Tone
Specify whether or not the machine makes a sound when the documents are placed in the feeder:
Off
On:
Orig. Detect. Tone Vol: 1 to 5
"Adjusting the Volume"

Display Settings

Settings
Descriptions
Language
Select the display language for the machine:
Bulgarian, Croatian, Czech, Danish, Dutch, English*, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese, Romanian, Russian, Slovak, Slovene, Spanish, Swedish, Turkish
"Switching the Display Language"
Contrast
Adjust the display contrast:
-2 to 0 to +2
"Adjusting the Display (Contrast and Inverted Colors)"
Invert Screen Colors
If <On> is specified, the colors of the display are inverted.
Select <On> in case you have difficulty viewing the display:
Off, On
"Adjusting the Display (Contrast and Inverted Colors)"
mm/Inch Entry Switch
Set the unit of measurement for the paper size:
mm, Inch
"Changing Units of Measurement "
Message Display Time
Set the duration during which each message is displayed on the screen:
1 to 2 to 5 (sec.)
"Changing the Message Display Time"
Scrolling Speed
Set the speed to scroll through the menu when all the menu items cannot be shown on the screen:
Slow, Normal, Fast
"Changing the Scroll Speed"
Cursor Movement
When entering characters, specify whether or not to move the cursor to automatically to the next field:
Auto, Manual
"Changing the Cursor Movement"

Toner Saver Mode

Settings
Descriptions
Copy
Set the Toner Saver mode for the Copy mode:
Off, On
"Using the Toner Saver Mode"
Fax
Set the Toner Saver mode for the Fax mode:
Off, On
"Using the Toner Saver Mode"

Paper Feed Method Switch

When you print on paper with a logo previously, you can perform the print to adjust the logo position correctly without replacing paper in the cassette even in 1-sided or 2-sided printing mode. You can specify the settings for each paper source:
Drawer 1: Print Speed Priority, Print Side Priority
"Selecting the Print Side"
10WR-08U