Installing the System Options/MEAP Applications

The procedures to install the system options or MEAP applications on the printer differ, depending on whether the printer is connected or not to an outside network. Select the procedure that matches your conditions using the references below.

Installing by Connecting this Printer to an Outside Network

Install from the Remote UI.
NOTE
Communication test
To check that the transmission with the delivery server is properly operating, if necessary, perform a communication test before installation.

Installing by Not Connecting this Printer to an Outside Network

Installing System Options

Install using one of the following procedures.
NOTE
If you install multiple system options
We recommend that you install from the Remote UI.
Procedure
Necessary Steps
Reference Page
Using the Remote UI to install
1.
Obtain the license file from the License Management System
2.
Install the license file using the Remote UI

Installing MEAP Applications

Use the following procedure to install.
Procedure
Necessary Steps
Reference Page
Using the Remote UI to install
1.
Obtain the license file from the License Management System
2.
Install the license file and application file using the Remote UI
3.
Start the MEAP applications from SMS
0978-0CU