Installing the Paper Feeder
By installing the optional paper feeder in addition to the supplied multi-purpose tray and paper cassette, the printer can feed up to 1,600 sheets of paper continuously and automatically.
Paper Feeder Unit PF-45
<If the printer is already installed>When installing the paper feeder in the printer after installing the printer, move the printer to an appropriate location temporarily.
For details on the precautions for when installing the paper feeder, see "Attention (Printer Installation)."
|
1
Take the paper feeder out of the box.
2
Remove the two pieces of tape attached to the positions shown in the figure.
3
Pull out the paper cassette of the paper feeder.
4
Remove the packing material and tape as shown in the figure.
(1) Remove the three pieces of tape.
(2) Fold the protrusions of the packing material on each side.
(3) Slide the paper guides in the directions of the arrows with holding the lock release levers (A).
(4) Remove the packing material.
5
Carry the paper feeder to the installation site.
Hold the lift handles when carrying the printer.
If you want to install the two paper feeders
Gently place the other paper feeder on the one already installed.
Also, match the positioning pins (A) and connector (B) when placing another paper feeder.
6
Pull out the paper cassette of the printer.
7
Carry the printer unit to the installation site.
After confirming that the covers and trays are closed, carry the printer by holding it by the lift handles from the front side.
8
Gently place the printer on the paper feeder so that each surface of the printer is flush with the front or side surfaces of the paper feeder.
Also, match the positioning pins (A) and connector (B) when placing the printer.
9
Insert the paper cassettes in the printer and paper feeder.
Push them into the printer and paper feeder firmly.
|
Next, perform the following procedures. (If you want to install the RAM and ROM modules, follow the procedure from Step 4 in "Installing RAM/ROM.")
|