Network Setting Items

You can change the network settings using various methods.

Network Setting Items

The setting items you can change using NetSpot Device Installer, FTP Client, or the control panel on the printer are as follows.
NOTE
The settings that you cannot specify using FTP Client, NetSpot Device Installer, or the control panel on the printer
Specify them using a Web browser (Remote UI).
(However, you cannot specify the settings with even using the Remote UI.)
About the item names
In the following table, the characters shown in parentheses are exclusively for FTP Client.
For example, "[IP Address] (INT_ADDR)" is displayed differently as follows, depending on the application.
Web browser (Remote UI):
[IP Address]
NetSpot Device Installer:
[IP Address]
config file of FTP Client:
[INT_ADDR]
Control Panel:
[IP Address]

General Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[System Manager Password]
(ROOT_PWD)
Up to 16 characters
(Blank)
[System Manager]
(SYS_CONTACT)
Up to 32 characters
(Blank)
[Device Name]
(DEVICE_NAME)
Up to 32 characters
LBP7680C/LBP7660C
[Location]
(SYS_LOC)
Up to 32 characters
(Blank)
[Permit End-User's Job Operation]
(USER_JOB_CONT)
ON, OFF
OFF
Support Link
[URL]
(LINK_URL1)
Up to 128 alphanumeric characters
http://www.canon.com

TCP/IP (IP v. 4) Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[Use IPv4] (IPV4_USE)
ON, OFF
ON
[DHCP] (DHCP_ENB)
ON, OFF
OFF
[RARP] (RARP_ENB)
ON, OFF
OFF
[BOOTP] (BOOTP_ENB)
ON, OFF
OFF
[IP Address] (INT_ADDR)
IP address
0.0.0.0
[Subnet Mask] (NET_MASK)
IP address
0.0.0.0
[Gateway Address] (DEF_GW)
IP address
0.0.0.0
[Primary DNS Server Address] (DNS_PADDR)
IP address
0.0.0.0
[Secondary DNS Server Address] (DNS_SADDR)
IP address
0.0.0.0
[Host Name] (HOST_NAME)
Up to 47 characters
"Canon" + "Last 6 digits of the MAC address"
[Domain Name] (DOMAIN_NAME)
Up to 47 characters
(Blank)
[DNS Dynamic Update] (DDNS_ENB)
ON, OFF
OFF
[WINS Resolution] (WINS_ENB)
ON, OFF
OFF
[WINS Server Address] (WINS_SERVER)
IP address
0.0.0.0
[Scope ID] (WINS_SCOPEID)
Up to 63 characters
(Blank)
[SMB Server Name] (SMB_SERVER)
Up to 15 alphanumeric characters
(Blank)
[SMB Workgroup Name] (SMB_WG)
Up to 15 alphanumeric characters
(Blank)
[Use ARP/PING] (ARP_PING_ENB)
ON, OFF
ON
[Use FTP Print] (FTP_PRINT_ENB)
ON, OFF
OFF
[FTP Print User Name] (FTP_PRINT_USER)
Up to 24 characters
(Blank)
[Password] (FTP_PRINT_PWD)
Up to 24 characters
(Blank)
[FTP Settings]
ON, OFF
OFF
[Use LPD Printing] (LPD_ENB)
ON, OFF
ON
[Print LPD Banner Page] (LPD_BANN)
ON, OFF
OFF
[Use RAW Printing] (RAW_ENB)
ON, OFF
ON
[Use Bidirectional Communication] (RAW_BIDIR_ENB)
ON, OFF
OFF
[Use IPP Print] (IPP_ENB)
ON, OFF
OFF
[SSL]
ON, OFF (Fixed at OFF when a key is not registered.)
OFF
[IPP Authentication] (IPP_AUTH_ENB)
ON, OFF
ON
[User Name] (IPP_AUTH_ACCUNT1)
Up to 24 characters (Must be entered when using IPP Authentication)
(Blank)
[Password] (IPP_AUTH_PASSWD1)
Up to 24 characters (Must be entered when using IPP Authentication)
(Blank)
[Use WSD Printing] (WSD_ENB)
ON, OFF
OFF
[Use WSD Browsing] (WSD_BROWSING)
ON, OFF
OFF
[Use Multicast Discovery] (WSD_MULTICAST_DISCOVERY)
ON, OFF
OFF
[Use HTTP] (HTTP_ENB)
ON, OFF
ON
[Use Proxy]
ON, OFF
OFF
[HTTP Proxy Server Address]
Up to 128 alphanumeric characters
(Blank)
[HTTP Proxy Server Port Number]
0 to 99999
80
[Use Proxy Within Same Domain]
ON, OFF
OFF
[Proxy Authentication]
ON, OFF
OFF
[User Name]
Up to 24 alphanumeric characters
(Blank)
[Password]
Up to 24 alphanumeric characters
(Blank)
[Discovery Response] (DISCOVERY_ENB)
ON, OFF
ON
[Scope Name] (DISCOVERY_SCOPE_NAME)
Scope name to be used for discovery using utility software such as NetSpot Device Installer. (Up to 32 characters *)
default
[Use SNTP] (SNTP_ENB)
ON, OFF
OFF
[NTP Server Name] (SNTP_ADDR)
IP address or host name
(Blank)
[Polling Interval] (SNTP_INTERVAL)
Interval for synchronizing time (1 to 48 hours)
24
*
You cannot use any of the following characters: "(", ")", ",", "!", "<", ">", "=", "~", ";", "+", "*", "\."

TCP/IP (IP v. 6) Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[Use IPv6] (IPV6_USE)
ON, OFF
OFF
[Use Stateless Address] (IPV6_STATELESS_USE)
ON, OFF
ON
[Use Manual Address] (IPV6_MANUAL_ADDR_USE)
ON, OFF
OFF
[IP Address] (IPV6_MANUAL_ADDR_SET)
IP address
(Blank)
[Prefix Length] (IPV6_MANUAL_ADDR_PREFIX)
0 to 128
64
[Default Router Address] (IPV6_MANUAL_ROUTER_ADDR)
IP address
(Blank)
[Use DHCPv6] (IPV6_DHCPV6_USE)
ON, OFF
OFF
[Primary DNS Server Address] (IPV6_DNS_ADDRESS_PRI)
IP address
(Blank)
[Secondary DNS Server Address] (IPV6_DNS_ADDRESS_SEC)
IP address
(Blank)
[Use IPv4 Host/Domain Names] (IPV6_DNS_NAME_SAME_AS_IPV4)
ON, OFF
OFF
[Host Name] (IPV6_DNS_HOST_NAME_V6)
Up to 47 characters
"Canon" + "Last 6 digits of the MAC address"
[Domain Name] (IPV6_DNS_DOMAIN_NAME_V6)
Up to 47 characters
(Blank)
[DNS Dynamic Update] (IPV6_DNS_DYNAMIC_SET)
ON, OFF
OFF
[Register Manual Address] (IPV6_DNS_MANUAL)
ON, OFF
OFF
[Register Stateful Address] (IPV6_DNS_STATEFUL)
ON, OFF
OFF
[Register Stateless Address] (IPV6_DNS_STATELESS)
ON, OFF
OFF

NetWare Network Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings Using NetSpot Device Installer
Settings Using FTP Client
Settings Using the Control Panel
[Use NetWare] (NW_ENB)
ON, OFF
OFF
[Frame Type] (NW_FRAME_TYPE)
Frame type used by NetWare
AutoSense([Auto Detect])
[IPX External Network Number]
(Display only)
[Node Number]
(Display only)
[Print Service] (NW_PRINT_SERVICE)
Print service to be used
ndsPserver([NDS PServer])
Bindery PServer
[File Server Name] (NW_PSERVER_FILE_SERVER_
NAME)
Name of the NetWare file server to which the NetWare print server belongs (1 to 47 characters)
(Blank)
[Print Server Name] (NW_PSERVER_PRINT_SERVER_NAME)
NetWare print server name to be used (1 to 47 characters)
(Blank)
[Print Server Password] (NW_PSERVER_PASSWD)
Password for accessing the print server (0 to 20 characters)
(Blank)
[Printer Number] (NW_PSERVER_PRINTER_NO)
Number for the printer connected to the NetWare print server (0 to 15)
0
[Service Mode] (NW_PSERVER_SERVICE_MODE)
Service mode to be used
psMode1: Only the currently loaded paper can be serviced.
psMode2: Paper can be changed as needed.
psMode3: The order of the jobs is rearranged to minimize the frequency of changing paper.
psMode4: The order of the jobs in a queue is rearranged to minimize the frequency of changing paper.
psMode4
[Printer Form] (NW_PSERVER_PRINTER_FORM)
Paper Define Form (0 to 255)
0
[Polling Interval] (NW_PSERVER_POLLING_INT)
Interval for checking the jobs (1 to 15 seconds)
5
[Buffer Size] (NW_PSERVER_BUFFER_SIZE)
Data Buffer Size (1 to 20 KB)
20
NDS PServer
[Tree Name](NW_NDSSERVER_TREE_NAME)
Name of the NDS tree to which the NetWare print server belongs (1 to 32 characters)
(Blank)
[Context Name] (NW_NDSSERVER_CONTEXT_
NAME)
Name of the context to which the NetWare print server belongs (1 to 255 characters)
(Blank)
[Print Server Name] (NW_NDSSERVER_PRINT_
SERVER_NAME)
NetWare print server name to be used (1 to 64 characters)
(Blank)
[Print Server Password] (NW_NDSSERVER_PRINT_
SERVER_PASSWORD)
Password for accessing the print server (0 to 20 characters)
(Blank)
[Printer Number] (NW_NDSSERVER_PRINTER_NO)
Number for the printer connected to the NetWare print server (0 to 254)
0
[Service Mode] (NW_NDSSERVER_SERVICE_
MODE)
Service mode to be used
psMode1: Only the currently loaded paper can be serviced.
psMode2: Paper can be changed as needed.
psMode3: The order of the jobs is rearranged to minimize the frequency of changing paper.
psMode4: The order of the jobs in a queue is rearranged to minimize the frequency of changing paper.
psMode4
[Printer Form] (NW_NDSSERVER_PRINTER_FORM)
Paper Define Form (0 to 255)
0
[Polling Interval] (NW_NDSSERVER_POLLING_INT)
Interval for checking the jobs (1 to 255 seconds)
5
[Buffer Size]
(NW_NDSSERVER_BUFFER_SIZE)
Data Buffer Size (3 to 20 KB)
20
RPrinter
[File Server Name] (NW_RPRINTER_FILE_SERVER_
NAME)
Name of the NetWare file server to which the NetWare print server belongs (1 to 47 characters)
(Blank)
[Print Server Name] (NW_RPRINTER_PRINT_SERVER_
NAME)
NetWare print server name to be used (1 to 47 characters)
(Blank)
[Printer Number] (NW_RPRINTER_PRINTER_NO)
Number for the printer connected to the NetWare print server (0 to 15)
0
NPrinter
[Tree Name](NW_NPRINTER_TREE_NAME)
Name of the NPrinter tree to which the NetWare print server belongs (1 to 32 characters)
(Blank)
[Context Name] (NW_NPRINTER_CONTEXT_NAME)
Name of the context to which the NetWare print server belongs (1 to 256 characters)
(Blank)
[Print Server Name] (NW_NPRINTER_PRINT_SERVER_
NAME)
NetWare print server name to be used (1 to 64 characters)
(Blank)
[Printer Number](NW_NPRINTER_PRINTER_NO)
Number for the printer connected to the NetWare print server (0 to 254)
0

AppleTalk Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Use AppleTalk]
(ATLK_ENB)
ON, OFF
OFF
[Phase]
Fixed at [Phase 2]
[Phase 2]
[Service Name]
(APRINT_1)
Up to 32 characters *1
LBP7680Cx/LBP7660Cdn
[Zone]
(ATK_ZONE)
Up to 32 characters *2
*
[Print Mode]*3
[Open Both Spool and Direct], [Open Spool], [Open Direct]
[Open Both Spool and Direct]
*1
"=", "@", "*", ":", and "~" cannot be used.
*2
"=", "@", ":", and "~" cannot be used.
*3
Can be specified only when PS ROM or PS/Barcode ROM is installed.

SMB Settings (LBP7680Cx Only)

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Use SMB Server](SMB_ENB)
ON, OFF
OFF
[Server Name](SMB_SERVER)
Up to 15 characters *
(Blank)
[Workgroup Name](SMB_WG)
Up to 15 characters *
(Blank)
[Comments](SMB_COMMENT)
Up to 48 characters
(Blank)
[Use LM Announce](SMB_LM_ENB)
ON, OFF
OFF
[Use SMB Printing](SMB_PRINT_ENB)
ON, OFF
OFF
[Printer Name](SMB_PRINTER)
Up to 13 characters *
(Blank)
*
You cannot enter a space between characters.

SNMP Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Use SNMPv1]
(SNMP_V1_ENB)
ON, OFF
ON
[Use Community Name 1]
(SNMP_COMMUNITY1_ENB)
ON, OFF
ON
[Community Name 1]
(SNMP_COMMUNITY1_NAME)
Up to 32 characters
public
[MIB Access Permission]
(SNMP_COMMUNITY1_ACCESS)
RW, RO
([Read/Write], [Read Only])
RO
([Read Only])
[Use Community Name 2]
(SNMP_COMMUNITY2_ENB)
ON, OFF
OFF
[Community Name 2]
(SNMP_COMMUNITY2_NAME)
Up to 32 characters
public2
[MIB Access Permission]
(SNMP_COMMUNITY2_ACCESS)
RW, RO
([Read/Write], [Read Only])
RO
([Read Only])
[Use SNMPv3]
(SNMP_V3_ENB)
ON, OFF
OFF
[Obtain Printer Management Information from Host]
(SNMP_GET_PRT_MNG_INFO)
ON, OFF
OFF
[Reject SNMP Packets While in Sleep Mode]
ON, OFF
OFF

User Settings (SNMPv3)

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[User Name]
Up to 32 alphanumeric characters
initial
[MIB Access Permission]
[Read/Write], [Read Only]
[Read/Write]
[Security Settings]
[Authentication Yes/Encryption Yes], [Authentication Yes/Encryption No], [Authentication No/Encryption No]
[Authentication Yes/Encryption Yes]
[Authentication Algorithm]
[MD5], [SHA1]
[MD5]
[Authentication Password] *
6 to 16 alphanumeric characters
initial
[Encryption Algorithm]
[DES], [AES]
[DES]
[Encryption Password] *
6 to 16 alphanumeric characters
initial
*
Can be specified only when the printer is in the state of SSL encrypted communication. (If the printer is not in the state of encrypted communication, specify the setting using the printer's control panel.)

Context Settings (SNMPv3)

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Context Name 1] - [Context Name 5]
Up to 32 alphanumeric characters
(Blank)

Spooler Settings (LBP7680Cx Only)

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Use Spooler](SPOOL_ENB)
ON, OFF
OFF

Startup Time Setting

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Startup Time]
(STRT_DELAY_TIME)
Waiting time from when you turn the printer ON to when the printer starts obtaining the address (0 to 300 seconds)
0

Ethernet Driver Setting

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Auto Detect]
ON, OFF
ON
[Communication Mode]
[Half Duplex], [Full Duplex]
[Half Duplex]
[Ethernet Type]
[10 Base-T], [100 Base-TX], [1000 Base-T]
[10 Base-T]

E-Mail Print Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[POP3 Server Name](EMAIL_POP_ADDR)
Up to 48 characters
(Blank)
[POP3 User Name](EMAIL_POP_ACCOUNT)
Up to 32 characters
(Blank)
[Password](EMAIL_POP_PASSWD)
Up to 32 characters
(Blank)
[POP3 RX Interval](EMAIL_POP_INTERVAL)
0 to 90 minutes
0*
[POP3 RX](EMAIL_PRINT_ENB)
ON, OFF
OFF
[POP3 Server Port Number](EMAIL_POP_PORTNO)
0 to 65535
110
[SMTP RX]
ON, OFF
OFF
[SMTP Server Port Number]
0 to 65535
25
*
When [0] is set, auto e-mail reception to the server is not performed.

Remote UI Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[Remote UI](RUI_ENB)*
Turing ON or OFF the Remote UI
ON
[Use SSL]
ON, OFF
OFF
*
Can be specified only by FTP Client or the printer's control panel

Permitted Receiving MAC Address Settings

: Can be specified: Cannot be specified
Option
Contents
Default
Settings
Using
NetSpot
Device
Installer
Settings
Using
FTP
Client
Settings Using the Control Panel
[MAC Address Filter]
ON, OFF
OFF
[MAC Address]
(Display only)

Software That Can Be Used for the Network Settings

You can perform the network settings for this printer using the following software.
:
Specifiable
:
Not specifiable
:
Can perform a part of the settings
Setting Type
Web Browser (Remote UI)
FTP Client
NetSpot Device Installer
ARP/PING Command
Control Panel of the Printer
Configuring the Ethernet Driver
Setting the Spooling Function (LBP7680Cx only)
Configuring the Communication Environment
Setting the IP Address of the Printer
Setting the TCP/IP Protocol
Setting IP v. 6
Preparing the NetWare Protocol Settings
Setting the NetWare Protocol
Setting the AppleTalk Protocol
Changing the Device Name or Administrator Information
Changing the Administrator Password
Specifying the Job Operation Permission for End-users
Restricting the Job Requests by Certain Devices
Keylock Settings
Changing E-Mail Print Settings
0265-06H