Removing the Packing Materials

NOTE
Store the removed packing materials
They are required when transporting the printer for relocation or maintenance.
About the packing materials
The packing materials may be changed in form or placement, or may be added or removed without notice.
1
Remove the four pieces of tape attached to the printer.
2
Open the front cover while pressing the open button.
3
Turn over the paper toward you.
4
Remove the packing material inside the front cover.
5
Remove the toner cartridge.
6
Shake the toner cartridge five or six times as shown in the figure to evenly distribute the toner inside the cartridge.
7
Place the toner cartridge on a flat surface.
8
Fold the tab, and then pull out the sealing tape (approx. 19 in. (48 cm)).
IMPORTANT
Precautions when pulling out the sealing tape
Do not pull the sealing tape diagonally, upward, or downward. If the tape is severed, this may become difficult to pull out completely.
If the sealing tape stops at midpoint, pull it out of the toner cartridge completely. If any tape remains in the toner cartridge, this may result in poor print quality.
Dispose of the removed sealing tape according to local regulations.
9
Remove the packing material with paper inside the front cover.
A plastic part attached to the end of paper (A) is also a packing material. Be sure to remove it.
10
Install the toner cartridge.
Push the toner cartridge into the printer firmly until it touches the back of the printer while aligning (A) on both sides of the toner cartridge with the toner cartridge guides inside the printer.
11
Close the front cover.
 If you cannot close the front cover
Make sure that the toner cartridge is installed in the printer properly. Do not try to forcefully close the front cover, as this may damage the printer.
Check !
Checking If the Packing Materials Are Removed
Check that the following packing materials are completely removed.
Next, perform one of the following procedures.
If you want to use the printer with the paper feeder installed
Place the paper feeder at the installation site before installing the printer.
"Installing the Paper Feeder"
If you want to use the printer without the paper feeder
Install the printer.
"Installing the Printer"
00AU-021