Network Setting Items

NOTE
About the item names
In the following table, the characters shown in parentheses are exclusively for FTP Client.
For example, "Device Name (SYS_NAME)" is displayed differently as follows, depending on the software.
Remote UI:
[Device Name]
NetSpot Device Installer:
[Device Name]
Config file of FTP Client:
[SYS_NAME]

General Settings

: Can be specified : Cannot be specified
Item
Description
Default Setting
Remote UI
FTP
Client
NetSpot Device Installer
(PS_NAME)
The name of the network interface
(The name is fixed at the default setting.)
CANONXXXXXX
[Device Name]
(SYS_NAME)
The name of the printer
(0 to 32 characters)
(Blank)
[Location]
(SYS_LOC)
The installation site of the printer
(0 to 32 characters)
(Blank)
[Administrator]
(SYS_CONTACT)
The name of the administrator of the printer
(0 to 32 characters)
(Blank)
[Phone]
(SYS_CONTACT_TEL)
The telephone number of the administrator of the printer
(0 to 32 characters)
(Blank)
[Comments]
(SYS_CONTACT_COMMENT)
Comments from the administrator of the printer
(0 to 32 characters)
(Blank)
(SERVICE_MAN_NAME)
The name of the service person
(0 to 32 characters)
(Blank)
(SERVICE_TEL)
The telephone number of the service person
(0 to 32 characters)
(Blank)
(SERVICE_COMMENT)
Comments from the service person
(0 to 32 characters)
(Blank)
[Display Language]
(DISP_LANG)
The language displayed in the Remote UI
(Chinese, English, French, German, Italian, Spanish, Japanese, Default)
Default
[Administrator Password]
(ROOT_PWD)
The password of the printer
(0 to 15 characters)
(Blank)
[Ethernet Driver Setting]
(NETWORK_SPEED)
The network transmission speed or transfer mode
(AUTO_SENSE, 10_HALF_DX, 10_FULL_DX, 100_HALF_DX, 100_FULL_DX)
AUTO_SENSE
[SNMP v. 1]
(SNMP_V1_ACCESS_ENB)
Access using the SNMP v. 1 protocol
YES
[SNMP v. 3]
(SNMP_V3_ACCESS_ENB)
Access using the SNMP v. 3 protocol
NO
[Community Name]
(PUB_COMMUNITY)
The community name of SNMP
(0 to 32 characters)
public
[Access Rights]
(SNMP_V1_ACCESS_MODE)
The operation mode of the SNMP v. 1 agent
(Read-only or Read and Write)
Read and Write
[Restrict SNMP Monitoring/Setting Changes]
(SNMP_CONT_ENB)
Whether to restrict users who can monitor or change the SNMP settings
NO
[Permit Specified Addresses]
[Reject Specified Addresses]
(SNMP_CONT_MODE)
Accept or reject monitoring and changing of settings using the SNMP protocol for users specified in [IP Addresses]
(Accept, Reject)
Accept
[IP Addresses]
(SNMP_CONT_LIST)
The IP addresses specified to restrict monitoring and changing the SNMP setting
(Blank)

Security Settings

: Can be specified : Cannot be specified
Item
Description
Default Setting
Remote UI
FTP
Client
NetSpot Device Installer
[Restrict TCP/IP Printing]
(TCP_CONT_ENB)
Whether to restrict the users who can print
NO
[Permit Specified Addresses]
[Reject Specified Addresses]
(TCP_CONT_MODE)
Accept or reject print jobs from users specified in [IP Addresses]
(Accept, Reject)
Accept
[IP Addresses]
(TCP_CONT_LIST)
The IP addresses rejected to perform TCP/IP printing
(Blank)
[Restrict Multicast Discovery]
(SLP_CONT_ENB)
Whether to restrict the users who can perform the multicast discovery
NO
[Respond to Specified IP Addresses]
[Do Not Respond to Specified Addresses]
(SLP_CONT_MODE)
Accept or reject the response to multicast discovery searches performed by users specified in [IP Addresses]
(Accept, Reject)
Accept
[IP Addresses]
(SLP_CONT_LIST)
The IP addresses rejected to perform the multicast discovery
(Blank)
[Restrict MAC Address Access]
(MAC_CONT_ENB)
Whether to restrict the users who can access
NO
[Permit Specified Addresses]
[Reject Specified Addresses]
(MAC_CONT_MODE)
Accept or reject access from the users specified in [MAC Addresses]
(Accept, Reject)
Accept
[MAC Addresses]
(MAC_CONT_LIST)
The MAC addresses permitted or rejected to access
(Blank)
[Access Logs]
(SEC_LOG_ENB)
Whether to obtain security access logs
NO
[Log Types]
(SEC_LOG_KIND)
Security access logs to obtain
0: No Access Log to Obtain
1: Rejected TCP/IP Print Jobs
2: Rejected SNMP Monitoring/Setting Changes
3: Rejected TCP/IP Print Jobs and Rejected SNMP Monitoring/Setting Changes
4: Rejected Multicast Discoveries
5: Rejected TCP/IP Print Jobs and Rejected Multicast Discoveries
6: Rejected SNMP Monitoring/Setting Changes and Rejected Multicast Discoveries
7: Access All the Logs
0
[Link]
(LINK_NAME1)
(LINK_NAME2)
The links displayed in [Support Links] in the Remote UI
(0 to 32 characters)
(Blank)
[URL]
(LINK_URL1)
(LINK_URL2)
The URL displayed in [Support Links] in the Remote UI
(0 to 128 characters)
(Blank)
[Comments]
(LINK_COMMENT1)
(LINK_COMMENT2)
The comments displayed in [Support Links] in the Remote UI
(0 to 64 characters)
(Blank)
[Link]
(DOWNLOAD_SITE_NAME)
The links displayed in [Support Links] in the Remote UI
(0 to 32 characters)
Download
Service
[URL]
(DOWNLOAD_SITE_URL)
The URL displayed in [Support Links] in the Remote UI
(0 to 128 characters)
http://www.
canon.com/
[Comments]
(DOWNLOAD_SITE_COMMENT)
The comments displayed in [Support Links] in the Remote UI
(0 to 64 characters)
Update
firmware

TCP/IP Settings

: Can be specified : Cannot be specified
Item
Description
Default Setting
Remote UI
FTP
Client
NetSpot Device Installer
[Frame Type]
(TCP_FRAME_TYPE)
The frame type used by TCP/IP
(The frame type is fixed at [Ethernet II].)
Ethernet II
(G_ARP_ENB)
Whether to use the Gratuitous ARP function
YES
[IP Address]
(INT_ADDR)
The IP address of the printer
192.168.0.215
[Subnet Mask]
(NET_MASK)
Subnet mask
255.255.255.0
[Gateway Address]
(DEF_ROUT)
Gateway address
0.0.0.0
[FTP Settings]
(FTP_ENB)
Whether to use the FTP server
YES
[Restrict User FTP Access]
(FTP_LIMIT_GENUSR)
Whether to restrict the FTP access from end-users
NO
[DHCP]
(DHCP_ENB)
Whether to use DHCP for the IP address setting
NO
[BOOTP]
(BOOTP_ENB)
Whether to use BOOTP for the IP address setting
NO
[RARP]
(RARP_ENB)
Whether to use RARP for the IP address setting
NO
[Primary DNS Server Address]
(DNS_ADDR)
The IP address of the primary DNS server
0.0.0.0
[Secondary DNS Server Address]
(DNS_ADDR2)
The IP address of the secondary DNS server
0.0.0.0
[DNS Dynamic Update]
(DDNS_ENB)
Whether to register the printer in DNS dynamically
NO
[DNS Host Name]
(HOST_NAME)
The host name of the printer
(0 to 63 characters)
(Blank)
[DNS Domain Name]
(DOMAIN_NAME)
The name of the domain to which the printer belongs
(0 to 64 characters)
(Blank)
[WINS Resolution]
(WINS_ENB)
Whether to use WINS Resolution
YES
[WINS Server Address]
(WINS_ADDR1)
The WINS server address
0.0.0.0
[WINS Host Name]
(WINS_HOSTNAME)
Registration of the WINS host name
(0 to 15 characters)
(Blank)
[Scope ID]
(NBT_SCOPE_ID)
The identifier for determining the communication range of the printer and computer
(0 to 220 characters)
(Blank)
[SNTP Server Name]
(SNTP_ADDR)
The IP address or name of the SNTP server
(0 to 64 characters)
(Blank)
(SNTP_CHECK_INTERVAL)
The time interval for SNTP updates
(10 min, 30 min, 1 hour, 3 hours, 6 hours, 12 hours, or 24 hours)
1hour
[Multicast Discovery Settings]
(SLP_ENB)
Whether to respond to multicast discovery searches
YES
[Scope Name]
(SLP_SCOPE)
The scope name to be used in multicast discovery
(0 to 32 characters)
DEFAULT
(HTTP_ENB)
Whether to enable the Remote UI
YES
[Time Zone]
(TIME_ZONE)
Time Zone
GMT
+ 0:00
[Daylight Saving Time]
(DAYLIGHT_SAVING)
Whether to set the daylight saving time
NO
00AU-05J