1-sided Printing and 2-sided Printing

You can select whether to print on one side or both sides of each sheet of paper. The default setting is 2-sided printing.
The following paper can be used for 2-sided printing.
Paper Type
Paper Size
Plain paper (60 to 90 g/m2)
Heavy paper (91 to 120 g/m2)
A4, Legal, Letter
Before performing 2-sided printing, see "Attention (1-sided Printing and 2-sided Printing)."
IMPORTANT
Precautions when performing 2-sided printing
Do not touch the paper during 2-sided printing until it is output completely. The paper is first output partially after the front side is printed, and then it is fed again to be printed on the reverse side.
Be sure to close the output selection cover before performing 2-sided printing.
 "Paper Loading and Output"
Printing on the reverse side of paper that was previously printed (Performing 2-sided printing manually)
This printer enables you to perform 2-sided printing manually by inserting the reverse side of the paper* that was previously printed even if the paper cannot be used for 2-sided printing.
When printing on the reverse side of paper that was previously printed, flatten the curl and load one sheet of paper at a time in the multi-purpose tray.
*
You can use only paper printed by this printer. Also, you cannot print on the printed side again.
1
Set the paper size switch lever to the appropriate position according to the paper size for 2-sided printing.
If the lever is not set to the appropriate position, this may result in misfeeds or paper jams.
1.
Open the duplex unit cover.
2.
Set the blue paper size switch lever (A) to the appropriate position.
A4:
Pull the lever toward you.
Letter or Legal:
Push the lever into the printer.
3.
Close the duplex unit cover.
2
Display the setting screen of the printer driver.
"Displaying the Setting Screen"
3
Specify the setting for [Print Style].
(1)
Display the [Finishing] sheet.
(2)
Select [1-sided Printing] or [2-sided Printing].
NOTE
Using Preview to specify the setting
You can also specify a print style by clicking the button in Preview.
: [1-sided Printing]
: [2-sided Printing]
4
Click [OK].
For details on the basic printing procedure, see "Basic Printing Procedure."