![]() |
|
|
|
![]() ![]() |
Set the IP address using NetSpot Device Installer in the supplied CD-ROM.
|
![]() |
|
|
|
![]() ![]() |
Set the IP address using the ARP/PING command in Command Prompt.
|
![]() |
|
|
|
![]() ![]() |
If the printer driver is installed and the printer and computer are connected by a USB cable, set the IP address using the Printer Status Window.
|
![]() |
IMPORTANT
|
|||
If Windows Firewall is enabledWe recommend that you set the IP address using the ARP/PING command or the Printer Status Window.
If you want to set the IP address using NetSpot Device Installer, you need to add "NetSpot Device Installer" to Windows Firewall in advance. Perform either of the following procedures.
Adding "NetSpot Device Installer" to the [Exceptions] sheet in the [Windows Firewall] dialog box
![]()
Installing NetSpot Device Installer (You can add it to Windows Firewall during the installation.)
![]() |
NOTE
|
If you changed the IP address after installing the printer driverSpecify the port to be used again in the printer driver.
|