![]() |
It is recommended that normally the printer driver be installed using "Easy Installation" on the supplied CD-ROM (CD-ROM Setup).
You can specify the printer connection settings and install the printer driver using "Easy Installation" as a series of operations. The e-Manual is also installed simultaneously.
|
(1)
|
Select [Create a new port].
|
(2)
|
Select [Standard TCP/IP Port].
|
(3)
|
Click [Next].
|
(1)
|
Select [Autodetect] or [TCP/IP Device].
|
||
(2)
|
Enter the IP address or name* of the printer in [Hostname or IP address].
|
||
(3)
|
Clear the [Query the printer and automatically select the driver to use] check box.
|
||
(4)
|
Click [Next].
|
![]() The value to be entered varies depending on how the IP address of the printer was set.
For more details, see "Basic Operations/Various Information for Windows" or ask your network administrator.
![]() ![]() Follow the on-screen instructions and search again for the printer, or see "Basic Operations/Various Information for Windows" and specify [Device Type].
|
![]() |
(1)
|
Select the INF file.
|
(2)
|
Click [Open].
|
(1)
|
Enter a new name if you want to change the printer name.
|
||
(2)
|
Click [Next].
|
→
|
The installation starts. Wait until the following screen disappears.
![]() |
![]() Click [Yes] or [Continue].
|
(1)
|
Select whether or not to share the printer (whether or not to use the computer on which the printer driver is being installed as the print server).
|
||||
(2)
|
Click [Next].
|
![]() |
When [Set as the default printer] is displayed, select whether or not to use the printer as the default printer. (Windows 7 and Server 2008 R2)
|
![]() |
When the following screen appears, you can remove the CD-ROM.
|
|
NOTE
|
If you changed the IP address after installing the printer driverWhen you install the printer driver using this procedure, Standard TCP/IP Port is created.
When you use Standard TCP/IP Port, if the IP address of the printer is changed, the port to be used with the printer driver should be changed.
|
(1)
|
Select [Local printer attached to this computer].
|
(2)
|
Clear the [Automatically detect and install my Plug and Play printer] check box.
|
(3)
|
Click [Next].
|
(1)
|
Select [Create a new port].
|
(2)
|
Select [Standard TCP/IP Port].
|
(3)
|
Click [Next].
|
(1)
|
Enter the IP address or name* of the printer in [Printer Name or IP Address].
|
||
(2)
|
Click [Next].
|
![]() The value to be entered varies depending on how the IP address of the printer was set.
For more details, see "Basic Operations/Various Information for Windows" or ask your network administrator.
![]() ![]() Follow the on-screen instructions and search again for the printer, or see "Basic Operations/Various Information for Windows" and specify [Device Type].
|
(1)
|
Select the INF file.
|
(2)
|
Click [Open].
|
(1)
|
Enter a new name if you want to change the printer name.
|
||
(2)
|
Click [Next].
|
NOTE
|
||||||||||
When sharing the printer (When using the computer on which the printer driver is being installed as the print server).
Perform the following procedure.
|
(1)
|
Select whether to print a test page.
|
(2)
|
Click [Next].
|
→
|
The installation starts. Wait until the following screen disappears.
![]() |
|
NOTE
|
If you changed the IP address after installing the printer driverWhen you install the printer driver using this procedure, Standard TCP/IP Port is created.
When you use Standard TCP/IP Port, if the IP address of the printer is changed, the port to be used with the printer driver should be changed.
|