Printing on Coated Paper

Confirming usable coated paper

This printer can use the following sizes of coated paper (100 to 220 g/m²).
Standard sizes
A4, B5, A5, Legal, Letter, Executive, Statement, Foolscap, and 16K
Custom paper sizes
In case of portrait orientation:
Width 83.0 to 215.9 mm, Length (Height) 127.0 to 355.6 mm
In case of landscape orientation:
Width 127.0 to 215.9 mm, Length (Height) 127.0 to 215.9 mm
NOTE
When using custom paper sizes
You need to register the custom paper sizes in the printer driver previously.

Loading coated paper

Load coated paper in the paper drawer.
<Precautions when loading coated paper>
Fan the paper stack thoroughly, and then align the edges before loading them. If they are not fanned enough, multiple sheets of paper may be fed at once, causing paper jams.
When fanning or aligning coated paper, try to hold the edges to avoid touching the printing surface.
Take care not to mark or stain the printing surface of coated paper with fingerprints, dust, or oil. This may result in poor print quality.

Printing from an application

After loading coated paper, perform printing.
The print speed drops when printing on coated paper.
0F40-03R