Specifying the Wired LAN Communication Mode and Transmission Speed

Specify the communication mode and transmission speed (Ethernet type) settings of wired LAN.
1
Start the Remote UI, and then log in as Management Mode.
2
Click [Settings/Registration].
3
Display the [Ethernet Driver Settings] page.
(1)
Select [Network Settings].
(2)
Click [Ethernet Driver Settings].
4
Click [Edit].
5
Specify the communication mode and transmission speed (Ethernet type) of wired LAN.
(1)
Specify the Ethernet driver settings.
(2)
Click [OK].
When the communication mode and transmission speed are obtained automatically
[Auto Detect]
Select the check box.
When the communication mode and transmission speed are obtained manually
[Auto Detect]
Clear the check box.
[Communication Mode]
Select the communication mode that corresponds to your network environment.
[Half Duplex]
Sending and receiving are alternated and are not performed at the same time.
[Full Duplex]
Sending and receiving are performed at the same time.
[Ethernet Type]
Select the transmission speed that corresponds to your network environment.
[10BASE-T]
Set to 10BASE-T network connection.
[100BASE-TX]
Set to 100BASE-TX network connection.
6
Restart the printer.
Turn the printer OFF, make sure that the Main Power indicator is off, wait for 10 seconds or longer, and then turn it ON again.
After the printer is restarted, the settings become effective.
0F40-05H