Checking the IP Address of the Printer

This section describes the procedure for checking the IP address of IPv4 using the Go key on the printer to print the "User Data List."

	You can also print and check Network Status Print from the Printer Status Window.
	To check the IP address of IPv6, use Network Status Print.
	"Checking the Printer Settings"

Print the "User Data List."

Check the IP address.

NOTE

This setting is configured to automatically obtain the IP address using DHCP or the Auto IP function.

Use the following procedure to make sure that the computer and printer are on the same subnet.

1.	From the [Start] menu, select [All Programs] → [Accessories] → [Command Prompt].
2.	Enter "ipconfig" as a command in Command Prompt.
3.	The network setting information of the computer appears. Confirm that the computer and printer are on the same subnet.

	<Example>
	Setting in a computer
	Subnet mask: "255.255.255.0" IP Address: "192.168.0.10"		The IP address of the printer needs to be "192.168.0.xxx". (xxx indicates an arbitrary number.)