Attention (Remote UI)

NOTE
When using SSL encrypted communication
To use SSL encrypted communication, a key and certificate must be created, and the key must be registered as the default key.
For details on the SSL encryption communication function and the procedure for registering a key, see "Setting the SSL Encrypted Communication Function" and "Specifying Keys and Certificates/CA Certificates."
When SSL is enabled and the display of certificate error (security warning) or a message appears
Follow the directions in the message.
When SSL is enabled and the Remote UI does not start
The key management file may be damaged, so perform the following procedure.
1.
Initialize the system settings using the reset button on the printer.
2.
Specify the network connection settings.
3.
Create the key and certificate again, and specify the SSL settings using the Remote UI.
When using a proxy server
On the settings for the proxy server of the Web browser, add the IP address of the printer to [Exceptions] (the addresses that do not use the proxy server).
The settings vary depending on the network environment. Consult your network administrator.
About cookies
Configure your Web browser to enable cookies.
Starting the Remote UI
If the Remote UI is running on multiple computers at a time, the latest settings are valid.
If you want to log in as Management Mode, we recommend that only one Remote UI should be running at a time.
If no operations are performed after login
If no operations are performed for 5 minutes, you must log in again before using the Remote UI.
0F40-066