Setting the SSL Encrypted Communication Function

Specify the settings for using the SSL encrypted communication function in this printer.
Before specifying the settings, see "Attention (SSL Encrypted Communication)."

Selecting Keys and Certificates

Select the key and certificate to be used for the SSL encrypted communication function.
1
Start the Remote UI, and then log in as Management Mode.
2
Click [Settings/Registration].
3
Display the [TCP/IP Settings] page.
(1)
Select [Network Settings].
(2)
Click [TCP/IP Settings].
4
Click [Key and Certificate] in [SSL Settings].
5
Specify a key and certificate to be used for SSL encrypted communication.
(1)
Select the key to use from a list of registered keys and certificates.
When you click [ ] (Certificate), you can check and verify detailed information of certificates.
(2)
Click [Default Key Settings].

Enabling the SSL encrypted communication function

Specify the settings to enable the SSL encrypted communication function to be used, for example, when you use the remote UI.
1
Display the [Remote UI Settings] page.
(1)
Select [Security Settings].
(2)
Click [Remote UI Settings].
2
Click [Edit].
3
Enable the SSL encrypted communication function.
(1)
Select the [Use SSL] check box.
Clearing the check box disables the SSL encrypted communication function.
(2)
Click [OK].
4
Restart the printer.
Turn the printer OFF, make sure that the Main Power indicator is off, wait for 10 seconds or longer, and then turn it ON again.
After the printer is restarted, the settings become effective.
0F40-076