Setting IEEE 802.1X Authentication

Specify various protocols (TLS, TTLS, or PEAP) for IEEE 802.1X authentication.
Before specifying the settings, see "Attention (IEEE 802.1X Authentication)."
Setting TLS Authentication Information
Setting TTLS/PEAP Authentication Information

Setting TLS Authentication Information

Specify authentication information for using TLS during IEEE 802.1X authentication.
IMPORTANT
To specify TLS authentication
You need to specify keys and their certificates or CA certificates to be used for authentication.
"Specifying Keys and Certificates/CA Certificates"
1
Start the Remote UI, and then log in as Management Mode.
"Starting the Remote UI"
2
Click [Settings/Registration].
3
Display the [IEEE 802.1X Settings] page.
(1)
Select [Network Settings].
(2)
Click [IEEE 802.1X Settings].
4
Click [Edit].
5
Select the [Use IEEE 802.1X] check box.
6
Enter a login name.
7
Select the [Use TLS] check box.
8
Click [Key and Certificate].
9
Specify keys and certificates to be used for authentication.
(1)
Select the key to use from a list of registered keys and certificates.
When you click [  ] (Certificate), you can check and verify detailed information of certificates.
"Checking Keys and Certificates/CA Certificates"
(2)
Click [Default Key Settings].
10
Click [OK].
11
Restart the printer.
Turn the printer OFF, make sure that the Main Power indicator is off, wait for 10 seconds or longer, and then turn it ON again.
→
After the printer is restarted, the settings become effective.

Setting TTLS/PEAP Authentication Information

Specify authentication information for using TTLS or PEAP during IEEE 802.1X authentication.
IMPORTANT
To specify TTLS/PEAP authentication
You need to specify the SSL encrypted communication function.
"Setting the SSL Encrypted Communication Function"
1
Start the Remote UI, and then log in as Management Mode.
"Starting the Remote UI"
2
Click [Settings/Registration].
3
Display the [IEEE 802.1X Settings] page.
(1)
Select [Network Settings].
(2)
Click [IEEE 802.1X Settings].
4
Click [Edit].
5
Select the [Use IEEE 802.1X] check box.
6
Enter a login name.
7
Select the [Use TTLS] or [Use PEAP] check box.
To use TTLS, select the TTLS internal protocol ([MSCHAPv2] or [PAP]).
8
Click [Change User Name/Password].
To use the login name entered to the user name at Step 6, select the [Use Login Name as User Name] check box.
9
Specify the user name and the password.
(1)
Enter a user name and a password.
(2)
Click [OK].
[User Name]
Enter a user name. You can enter up to 24 single-byte alphanumeric characters.
[Change Password]
Select the check box when changing the password.
[Password]
Enter a password. You can enter up to 24 single-byte alphanumeric characters.
[Confirm]
To confirm the [Password] you entered, enter it again.
10
Click [OK].
11
Restart the printer.
Turn the printer OFF, make sure that the Main Power indicator is off, wait for 10 seconds or longer, and then turn it ON again.
→
After the printer is restarted, the settings become effective.
0F5J-078