Adjusting Color (Calibration)

This section describes the procedure for performing calibration manually.
IMPORTANT
Precautions when performing calibration
If you perform calibration frequently, this may affect the life of the toner cartridges.
Perform calibration after making sure that the toner remains in the toner cartridges.
You can check the current toner cartridges status of each color in the [Consumables Information] dialog box in the Printer Status Window.
"Checking the Consumables Status"
If you perform calibration in the state where the toner cartridges have reached the end of their life, calibration may not finish properly. In this case, replace the toner cartridges, and then perform calibration again.
"Toner Cartridge Replacement"
1
Click [ ] displayed in the task tray, and then select a printer name.
2
From the [Options] menu, select [Utility] → [Calibration].
3
Click [OK].
NOTE
Calibration time
It takes approximately 130 seconds.
0F5J-01X