Data Is Not Printed in the Correct Color (Specified Color) Due to Color Mismatches

Perform one of the following solutions according to the cause.

<Cause 1> The toner cartridges are not installed properly.

Solution

Check the installation status of the toner cartridges.

"Replacing the Toner Cartridge"

<Cause 2> Appropriate paper is not being used.

Solution

Replace the paper with that which can be used with this printer.

"Usable Paper"

<Cause 3> The toner cartridges are almost out of toner.

Solution 1	Correct color mismatches. "Correcting Color Mismatches (Color Mismatch Correction)"
Solution 2	Check the toner cartridges status and replace the toner cartridges of the colors are nearing the end of their life. "Checking the Consumables Status" "Replacing the Toner Cartridge"

<Cause 4> The drum in any of the toner cartridges has deteriorated.

Solution

Replace the toner cartridges with new ones.

"Replacing the Toner Cartridge"

<Cause 5> Printed before performing calibration or color mismatch correction immediately after the printer is turned ON and so on.

Solution

Make sure that calibration or color mismatch correction is completed before sending data to the printer.

Specify whether calibration or color mismatch correction should be performed immediately after the printer is turned ON.

"Auto Image Quality Adjustment Settings"

<About color mismatch>

Laser printers are manufactured with technology of high precision. A color mismatch may be slightly conspicuous depending on the print image. Please note that this is due to the structure of laser printers and is not a printer malfunction.