Copy Settings
 | All the settings about the copy are listed with short descriptions. Default settings are marked with a dagger (  ). |
 |
Asterisks (*)Settings marked with an asterisk (*) are only available when the optional Cassette Feeding Unit or Cassette Module is attached. |
Change Default Settings
You can change the factory default settings about copy. The selected settings are used as the default settings of the copy function. Changing Default Settings
Number of Copies 1 to 999Color Mode Auto Select Color Full Color Black & White Density Nine Levels Background Auto Adjust (Manual) Original Type Text/Photo/Map Text/Photo/Map (Quality) Printed Image Text 2-Sided Off 1-Sided->2-Sided 2-Sided->2-Sided 2-Sided->1-Sided Copy Ratio Custom Ratio 100% (Direct) 400% (Max) 200% 129% STMT->LTR 78% LGL->LTR 64% LTR->STMT 50% 25% (Min) Paper Multi-Purpose Tray Drawer 1 Drawer 2* Drawer 3* Drawer 4* N on 1 Off 2 on 1 4 on 1 ID Card Copy Select Layout Collate Off On Erase Frame Off On Sharpness Seven Levels Color Balance Yellow 17 Levels Magenta 17 Levels Cyan 17 Levels Black 17 Levels Fine Adjust Yellow High: 17 Levels Medium: 17 Levels Low: 17 Levels Magenta High: 17 Levels Medium: 17 Levels Low: 17 Levels Cyan High: 17 Levels Medium: 17 Levels Low: 17 Levels Black High: 17 Levels Medium: 17 Levels Low: 17 Levels |
Initialize Default Settings
Initialize settings that were specified with Change Default Settings and return them to their default state.