Turning the Power ON and Specifying the Display Language
When the machine is turned ON, the initial setting screen appears. Specify the necessary settings using the following procedure.
|
|
|
The initial setting screen is displayed only when the machine is turned ON for the first time.
|
1
Press the power switch to turn the machine ON.
When the machine is turned ON for the first time, a blank sheet may be output, but this is not abnormal.
If an optional SD card was installed at the same time as the machine, a message appears on the display when the power is turned ON. Press 
to initialize the SD card. Initializing the SD Card
to initialize the SD card. Initializing the SD Card2
Select the display language using 
/ 
, and then press .
/ , and then press .
3
Specify the current date, and then press .
.
4
Specify the current time, and then press .
.
 |
The following screen appears, and the settings are completed.
 |
When setting time zones and daylight savings time
Specify the time zone and daylight saving time settings in <Date/Time Settings> in the setting menu of the operation panel. Date/Time Settings
Specify the time zone and daylight saving time settings in <Date/Time Settings> in the setting menu of the operation panel. Date/Time Settings
If optional accessories were installed at the same time as the machine
If the optional ROM was installed at the same time as the machine, see Checking that the ROM Is Properly Installed on the Machine to make sure that the ROM is properly installed.
If the optional ROM was installed at the same time as the machine, see Checking that the ROM Is Properly Installed on the Machine to make sure that the ROM is properly installed.
»
Continue to Connecting to a Computer.