Relocating the Machine
The machine is heavy. Make sure to follow the procedures below when moving the machine to avoid injury, and also make sure to read the safety precautions before you begin. Important Safety Instructions
1
Turn OFF the machine and computer.
When you turn OFF the power, be sure to shut down the machine from the operation panel without using the power switch. Turning OFF the Power (Performing a Shutdown)
2
Disconnect the cables and cord from the machine in numerical order as in the illustration below.
Whether the LAN cable (
) and USB cable (
) are connected depending on your environment.
) and USB cable () are connected depending on your environment.
 Power plug Power cord LAN cable USB cable |
 |
3
When transporting the machine across a long distance, remove the toner cartridge. How to Replace the Toner Cartridge
4
Pull out the paper drawer until it stops, and remove it while lifting the front side.
5
Close all the open covers including the multi-purpose tray, and then move the machine to a new location.
Use the handles on both sides of the machine, and have at least two people carry it.
Be sure to hold the lift handles
Do not move the machine by holding the duplex unit.
Do not move the machine by holding the duplex unit.
If the optional paper feeder is attached to the machine
Unlock the paper feeder before lifting the machine, and transport the paper feeder separately.
Unlock the paper feeder before lifting the machine, and transport the paper feeder separately.
6
Carefully place the machine at the new installation site.
For information about how to install the machine after relocating it, see Setting Up the Machine.