A Portion of the Page Is Not Printed

Perform one of the following solutions according to the cause.

<Cause 1> The setting for the scaling factor is not appropriate.

Solution 1
Perform the following procedure in the printer driver.
1.
Display the [Page Setup] tab.
2.
Clear the [Manual Scaling] check box.
If the [Manual Scaling] check box is cleared, the scale factor will be set according to [Page Size] and [Output Size] automatically.
Solution 2
Perform the following procedure in the printer driver.
1.
Display the [Page Setup] tab.
2.
Select the [Manual Scaling] check box, and then specify an appropriate scale factor according to the paper size to be used.
You can specify the same setting from the printer's control panel.

<Cause 2> Paper is not loaded properly in the paper drawer or multi-purpose tray.

Solution
Load the paper properly.

<Cause 3> A document with no margins was printed.

Solution 1
Data is printed with a margin of 5 mm (10 mm for envelopes). Provide a margin around the data.
Solution 2
Perform the following procedure if you are using the printer driver.
PCL/UFR II Printer Driver
1.
Display the [Finishing] tab.
2.
Click [Advanced Settings].
3.
Set [Expand Print Region and Print] to [On].
PS Printer Driver
See Help of the PS printer driver.
The edges of the printout may be partly missing, depending on the settings of the document to be printed.
07YS-0LH