1-sided Printing and 2-sided Printing

You can select whether to print on one side or both sides of each sheet of paper.
The default setting for [Print Style] is [2-sided printing].
Paper Type
Paper Size
Plain paper
(60 to 90 g/m²)
Heavy paper
(91 to 120 g/m²)
Standard size paper
A4, Legal, Letter and Foolscap
Custom size paper:
210.0 to 215.9 mm wide and 279.4 to 355.6 mm long
Before performing 2-sided printing, see "Attention (1-sided Printing and 2-sided Printing)."
IMPORTANT
Precautions when performing 2-sided printing
Do not touch the paper during 2-sided printing until it is completely output. The paper is first partially output after the front side is printed, and then it is fed again to be printed on the back side.
Be sure to close the output selection cover before performing 2-sided printing.
Printing on the back side of paper that was previously printed (performing 2-sided printing manually)
The printer can manually print the back side* of paper that has been printed once.
When printing on the back side of paper whose front side was previously printed, flatten out any curled paper and load one sheet of paper at a time in the multi-purpose tray.
*
This is only for paper that has been printed using this printer. Also, you cannot print again on the same side of the paper that was printed before.
1.
Click [Finishing].
For instructions on how to display the printer driver screen, see "Printing" or "Configuring the Default Print Settings."
2.
Select [1-sided Printing] or [2-sided Printing] from [Print Style]
NOTE
The default setting for [Print Style] is [2-sided Printing]. You can also change the default setting to [1-sided Printing]. For instructions on changing the default settings, see "Configuring the Default Print Settings."
3.
Select the binding edge from [Binding Location].
The output image is displayed in the preview area.
4.
Click [OK].

Note
The display may vary according to the operating system, as well as the type and version of the printer driver.
0987-050