Setting TLS Authentication Information
Set authentication information for using TLS with the IEEE802.1X authentication method.
TLS performs mutual authentication using the authentication server's certificate and the printer's certificate.
IMPORTANT
|
In order to set up TLS authentication
You need to register a key and certificate or a CA certificate used for authentication to the printer in advance.
|
1
Start the Remote UI, and then log in as Administrator.
2
Click [Settings/Registration].
3
Select [Network] from the [Preferences] menu.
4
Click [IEEE802.1X Settings].
5
Click [Edit...].
Enter the login name.
Up to 24 alphanumeric characters can be entered.
7
Select the [Use TLS] check box.
8
Click [Key and Certificate...].
Select the key to use, and then click [Default Key Settings].
10
Select the [Use IEEE802.1X] check box.
If a Message Appears
A message will be displayed if there is anything wrong with the settings. See Steps 6 to 9, and check the settings.
|
11
Click [OK].
12
Perform a hard reset or restart the printer.
Perform a hard reset or restart the printer.
→
|
After performing a hard reset or restarting the printer, the settings are effective.
|
NOTE
|
To perform a hard reset
You can perform a hard reset using the following procedure.
1.
|
Click [Settings/Registration].
|
2.
|
Select [Device Control] from the [Output/Control] menu.
|
3.
|
Select [Hard Reset], and then click [Execute].
|
|